A set of state-of-the-art FE vehicle, restraint system, dummy, and whole body human models was constructed and validated against several sets of quasi-static and dynamic rollover tests. HIII dummy responses during three selected trip-over scenarios were simulated using an FE vehicle model equipped with four different roof stiffness values. It was found that the high dummy head accelerations and...

Perhaps the most significant development in coal mine ground control during the last century was the introduction of roof bolting during the late 1940’s and 1950’s. From an engineering standpoint, roof bolts are inherently more effective than the wood timbers they replaced. Roof bolts promised to dramatically reduce the number of roof fall accidents, which then claimed hundreds of lives each ye...

considering current population rate and ratio of non renewable energies in countries' annual energy diagram which lead to increase of pollutions reeked from and irreparable effects on living environment, there will be an energy and living environment crisis in close future. so there are two main approaches that should be considered in countries' future program: change of construction ...

Urban green roofs are discussed as a local climate adaptation measure to limit surface warming and increase evaporative cooling by vegetation in urban environments. A five month measurement campaign was conducted to observe surface and air temperatures as well as dewfall dynamics and amounts on an urban green and co-located bitumen roof. Measurements were performed in the period from August to ...

Building reconstruction is one of the most difficult and important 3D modelling problems for urban environment. In this paper, we develop an approach using minimum number of basic geometric elements to reconstruct the buildings. The basic element is a number of unstructured 3D points representing the topological identity of a building roof. Such point primitives can be measured by human or comp...

This paper presents a model-based approach for 3-D building reconstruction unstructured distinct points. The data structure of a building is an unstructured roof point cloud digitized by operators. Constructive Solid Geometry (CSG) model is applied in our approach for a complex roof which can be decomposed into three types of primitive models. The primitive model is represented as a tree. The l...

This paper compares the paradigms of LiDAR and aerophotogrammetry in the context of building extraction and briefly discusses a photogrammetric strategy for refining building roof polyhedrons previously extracted from LiDAR data. In general, empirical and theoretical studies have confirmed that LiDAR methodologies are more suitable in extracting planar roof faces and ridges of the roof, whereas...

Roof-cutting and pressure-releasing technology are used to cut out the pressure transmission line of critical blocks in roof, causing roof totally collapse gob, while NPR large deformation anchor cable support keeps highway its self-formed state. The gangue compactness has increased greatly when fully collapsed filled gob's edge. At end working face, void ratio between rock loose area is decrea...