The flexural behaviour of concrete containing Foamed glass as partial replacement of coarse aggregate is investigated. The coarse aggregate was replaced with 0%, 25%, 50%, 75% and 100% Foamed glass. All other constituents were maintained the same. Reinforced concrete beams were cast using 2 bars of 8mm in diameter in the tensile zone. The density and compressive strength of concrete decreased a...

The project aims to study tensile softening behavior of fiber reinforced concrete .Concrete is very much weak in tension but by addition of randomly oriented short crimped steel fibers will change the behavior from brittle to ductile. In the present work, the steel fibers were added at the volume fraction, being 0%, 0.5%, 1%, 1.5% to the normal strength concrete and high strength concrete. The ...

The effects of loading rate on the reinforced concrete beams are experimentally studied in the present paper. Firstly, the effects of strain rate on the different grades of concrete are investigated using the electro-hydraulic servo-controlled testing system at the strain rate that might be experienced during earthquakes. Based on the test results, the dynamic increasing factors (DIF) of concre...

In the present work, behavior of inoxydable steel as reinforcement bar in composite concrete is being investigated. The bar-concrete adherence in reinforced concrete (RC) beam is studied and focus is made on the tension stiffening parameter. This study highlighted an approach to observe this interaction behavior in bending test instead of direct tension as per reported in many references. The a...

This paper presents a method of analysis for the response of concrete beams reinforced with fibrereinforced-plastic (FRP) tension rods and aramid spirals. Three different kinds of longitudinal reinforcement are adopted; CFRP, AFRP and GFRP. Both under-reinforced and over-reinforced sections are described. It is found that the ratio of neutral axis depth and effective depth can be used as an ind...

Reinforced concrete walls are commonly used as the primary lateral force-resisting system for tall buildings. As the tools for conducting nonlinear response history analysis have improved and with the advent of performancebased seismic design, reinforced concrete walls and core walls are often employed as the only lateral forceresisting system. Proper modelling of the load versus deformation be...

the present paper offers a meso-scale numerical model to investigate the effects of random distribution of aggregate particles and steel fibers on the elastic modulus of steel fiber reinforced concrete (sfrc). meso-scale model distinctively models coarse aggregate, cementitious mortar, and interfacial transition zone (itz) between aggregate, mortar, and steel fibers with their respective materi...

This paper presents an experimental study conducted to investigate the effect of fiber reinforcement on the mechanical properties and shrinkage cracking of recycled fine aggregate concrete (RFAC) with two types of fiber-polyvinyl alcohol (PVA) and nylon. A small fiber volume fraction, such as 0.05% or 0.1%, in RFAC with polyvinyl alcohol or nylon fibers was used for optimum efficiency in minimu...

The deflection of concrete beams reinforced with GFRP bars is higher than those which are reinforced with steel bars. The purpose of this paper is to propose a new equation for estimating the effective moment of inertia in FRP-reinforced concrete beams. This will be accomplished by using experimental results and the genetic algorithm approach. Genetic algorithm is used for optimizing the error ...

Reinforced concrete walls are commonly used as the primary lateral-force-resistingsystem for tall buildings. As the tools for conducting nonlinear response history analysis have improved and with the advent of performance-based seismic design, reinforced concrete walls and core walls are often employed as the only lateral-force-resisting-system. Proper modeling of the load versus deformation be...