Additive manufacturing by laser sintering is able to produce high resolution metal constructs for orthopedic and dental implants. In this study, we used a human trabecular bone template to design and manufacture Ti-6Al-4V constructs with varying porosity via laser sintering. Characterization of constructs revealed interconnected porosities ranging from 15-70% with compressive moduli of 2579-369...

BACKGROUND AND PURPOSE Braided self-expandable stents and flow diverters of uniform construction may develop zones of heterogeneous porosity in vivo. Unwanted stenoses may also occur at the extremities of the device. We studied these phenomena in dedicated benchtop experiments. MATERIALS AND METHODS Five braided devices of decreasing porosity were studied. To simulate discrepancies in diamete...

[1] Model applicability to core-scale solute transport is evaluated using breakthrough data from column experiments conducted with conservative tracers tritium ðHÞ and sodium-22 ðNa Þ, and the retarding solute uranium-232 ðUÞ. The three models considered are single-porosity, double-porosity with single-rate mobile-immobile mass-exchange, and the multirate model, which is a deterministic model t...

Understanding the relevant permeability properties of ultrafiltration membranes is facilitated by using materials and procedures that allow a high degree of control on morphology and chemical composition. Here we present the first study on diffusion permeability through gyroid nanoporous cross-linked 1,2-polybutadiene (1,2-PB) membranes with uniform pores that, if needed, can be rendered hydrop...

The use of porosity to modify the functional properties of piezoelectric ceramics is well known in the scientific literature as well as by the industry, and porous ceramic can be seen as a 2-phase composite. In the present work, examples are given of applications where controlled porosity is exploited in order to optimise the dielectric, piezoelectric and acoustic properties of the piezoceramic...

Mercury intrusion is frequently used for the characterization of porous materials, giving assess to parameters such as porosity and pore size distribution as well as density (skeletal and bulk). In the pulp and paper technology field, measurements of wood porosity are important, for instance to anticipate the liquor impregnation ability in the pulping stage. With regard to pulp and paper, poros...

Inguinal hernia repairs are among the most frequent operations performed worldwide. This study aims to provide further understanding of structural characteristics of hernia prostheses, and better comprehensive evaluation. Weight, porosity, pore size and other physical characteristics were evaluated; warp knitting structures were thoroughly discussed. Two methods referring to ISO 7198:1998, i.e....

In the die-casting process, the formation of pores in components is unavoidable. This porosity has a harmful effect on the strength and pressure tightness of die castings. To eliminate the porosity in components, its predominant cause has to be identified as being due to either shrinkage or gas. In practice, however, it is frequently difficult to tell the difference between porosity due to shri...

The influence of sorption-induced coal matrix deformation on the evolution of porosity and permeability of fractured coal seams is evaluated, together with its influence on gas recovery rates. The porosity-based model considers factors such as the volume occupied by the free-phase gas, the volume occupied by the adsorbed phase gas, the deformation-induced pore volume change, and the sorptionind...

Typical cathode materials of Li-ion battery suffer from a severe loss in specific capacity, and this problem is regarded as a major obstacle in the expansion of newer applications. To overcome this, porous cathodes are being extensively utilized. However, although it seems that the porosity in the cathode would be a panacea for high performance of LIBs, there is a blind point in the cathode con...