The use of magnesium alloys is limited due to their susceptibility to corrosion although they have many attractive physical and mechanical properties. To increase mechanical and corrosion properties of these alloys, many deposition method and coating types are used. Electroless Ni–B coatings have received considerable interest recently due to its unique properties such as cost-effectiveness, th...

Coated powder particles composed of a ceramic core and a metallic coating are being considered for plasma spray applications. The goal of using these powders is to produce particulate-reinforced metal-matrix composite coatings. In this work, the feasibility of plasma spray processing in producing these composite coatings is evaluated. A numerical model is presented to analyze the in-flight ther...

We discuss a method to control the coating thickness deposited onto large and strongly curved optics by ion beam sputtering. The technique uses an original design of the mask used to screen part of the sputtered materials. A first multielement mask is calculated from the measured two-dimensional coating thickness distribution. Then, by means of an iterative process, the final mask is designed. ...

The composition, nanostructure, tribological and corrosion behaviour of reactive arc evaporated CrBxNy coatings have been studied and compared to CrN. The CrBxNy coatings were deposited on a commercial Oerlikon Balzers RCS coating system employing 80:20 Cr:B targets. To vary the composition, the nitrogen fraction was adjusted (N2 fraction = N2/(Ar + N2)) and a moderate bias voltage of –20 V was...

The paper presents an analysis of the heat transfer processes in electric arc plasma conditions between powder material and jet different convective states. generated for coating deposition are considered based on varying jet–powder interaction. formed deposited onto substrate acts as indicator efficiency. is facilitated by turbulent nature jet. presented calculation results demonstrate influen...

The corrosion behavior of copper cold spray coatings on a carbon steel substrate was compared to that of commercially available wrought copper under the conditions anticipated in a nuclear waste repository. Corrosion potential and linear polarization resistance measurements were conducted over 90 d to 120 d in 3.0 mol/L NaCl under anoxic (1) and oxygenated-toanoxic (2) conditions to simulate th...

A new approach for SrBi2Nb2O9 (SBN) thin ®lms synthesis using aqueous solution was successfully experienced. The deposition solution was prepared from Sr±Bi±Nb mixed-citrate solution, requiring no special atmosphere and using common reagents. Films were deposited by dip coating onto Pt/Ti/SiO2/ Si(100) substrates and heat treated at temperatures ranging from 300 to 700 C. The process of formati...

Combinations of NiCoCrAlY APS and high-velocity oxygen fuel (HVOF) bond coatings were deposited on alloy 247 disk substrates with yttria-stabilized zirconia (YSZ) top to assess the benefit air plasma sprayed (APS) ‘flash’ coatings. Using 1-h cycles at 1100 ℃ in 10% H2O HVOF-only APS-only as a baseline, it was found that flash extended average coating lifetime by 16% 35% thicker performing best....

Glassy deposits mainly comprising of calcium–magnesium–alumina–silicate (CMAS) accelerate the spallation thermal barrier coatings (TBCs). In this work, an Al2O3 layer was produced on yttria-stabilized zirconia (YSZ) coating by plasma spray–physical vapor deposition (PS–PVD). The effects processing parameters during PS–PVD process microstructures deposited were investigated. A homogeneous with p...