Problem statement: The Rotor reactance control by inclusion of external capacitance in the rotor circuit has been in recent research for improving the performances of Wound Rotor Induction Motor (WRIM). The rotor capacitive reactance is adjusted such that for any desired load torque the efficiency of the WRIM is maximized. The rotor external capacitance can be controlled using a dynamic capacit...

It is possible to improve vehicle vibration by tuning the parameters of engine mounting system. By optimization of mount characteristics or finding the optimal position of mounts, vibration of the engine and transmitted force from the engine to the chassis can be reduced. This paper examines the optimization of 6-degree-of-freedom engine mounting system based on torque roll axis (TRA) mode deco...

Modern utility-scale wind turbines are typically controlled using yaw, generator torque, and blade pitch actuation (Pao and Johnson, 2011). The yaw motor is used to align the rotor with the wind direction for the purpose of maximizing power capture. Generator torque is controlled during below-rated (region 2) operation to maximize power capture by maintaining the optimal tip speed ratio. In abo...

A particle, shaped as an ellipsoid of revolution and rotating about an arbitrary axis, experiences a torque in a rarefied monatomic gas because of the impact with the gas atoms. This torque is calculated for the case where the linear dimensions of the ellipsoid are small compared with the mean free path of the gas. The interaction of the gas atoms with the ellipsoidal surface is taken into acco...

Background: An ISO standard tooth profile has a symmetric pressure angle of 20°. However, the load capacity can be increased with respect to bending and contact pressure by increasing the pressure angle on the meshing side of an asymmetric tooth. Accordingly, we analyzed the torque transmission capacity of asymmetric gears with various pressure angles. Methods: We calculated the deflection and ...

I . Introduction Multi-phase machines offer several key features, such as high reliability, high torque density, and high efficiency . Therefore, they are obtained wide applications from automotive to aerospace [1][2] . One of them is the five-phase PM machine, where the torque density can be improved by injecting third harmonic current . However, in order to maintain high torque density and re...

In the case of widely-uncertain non-linear system control design, it was very difficult to design a single controller to overcome control design specifications in all of its dynamical characteristics uncertainties. To resolve these problems, a new design method of robust fuzzy control proposed. The solution offered was by creating multiple soft-switching with Takagi-Sugeno fuzzy model for optim...

This paper presents a theoretical derivation and computer simulation of an optimal speed controller for a brushless dc motor using feedback from a linear model running in parallel with the inverter-fed model. The intent of the feedback from the linear model is to eliminate torque ripples from the inverter drive. A nonlinear model of such a motor, transformed into a linear model by a local diphe...

Introduction: Torque in orthodontics is vital in final positioning of the teeth during fixed appliance therapy. Torqueing of archwires is a significant factor in transferring the applied forces to the bracket which might cause deformation of the slot. Any deformation in the bracket slot can vary the torque prescription and thus can affect the tooth position. Aim: To evaluate and compare the def...

Introduction: The purpose of this study was to compare the accuracy of the torque wrenches used in different dental implant systems. Methods: We evaluated 42 torque wrenches used in different dental clinics in Mashhad, Iran, using a digital torque meter (Mark 10). High (25, 30 and 35 N·cm) and low (15 N·cm) levels of torque were examined. Ten tests were performed on each wrench, and the mean va...