Heterogeneous catalysts are promising for the transesterification reaction of vegetable oils to produce biodiesel and have been studied intensively over the last decade. Unlike the homogeneous catalysts, heterogeneous catalysts can be easily separated from reaction mixture and reused for many times. They are environmentally benign and could be easily operated in continuous processes. This revie...

A simple method to fabricate parallel and/or crossed networks of ultra-long single-walled carbon nanotube (SWNT) arrays based on carbon monoxide-chemical vapor deposition (CO-CVD) by a ‘‘ fast-heating ’’ growth process is reported. The catalysts which are water-soluble inorganic molecular clusters containing Fe and Mo atoms can be easily ‘‘drawn’’ on the substrate by an ink pen using the cluste...

In the present work, ceria, ceria-zirconia (Ce = 80 at.%, Zr = 20 at.%), ceria praseodymia (Ce = 80 at.%, Pr = 20 at.%) and ceria-zirconia-praseodymia catalysts (Ce = 80 at.%, Zr = 10 at.% and Pr = 10 at.%) have been prepared by the multi-inlet vortex reactor (MIVR). For each set of samples, two inlet flow rates have been used during the synthesis (namely, 2 ml min-1, and 20 ml min-1) in order ...

Introduction For emissions control of multicomponent exhaust gas streams, catalytic converters have to perform three functions: the catalytic oxidation of carbon monoxide to carbon dioxide, the destruction of Volatile Organic Carbon compounds (VOC’s), and NOx abatement. State-of-art catalysts for CO oxidation are based on CuMn2O4 (hopcalite), for VOC combustion on Pt/alumina, and for DeNOx eith...

Oxidative degradation of Ethylendiamintetraacetic acid (EDTA) under UV irradiation can be carried out with oxygen absorbed from ambient air. This degradation process is a dual phase multi step process. In the first phase rapid cleavage of the substance is observed. At ambient temperature the intermediates slowly oxidize by forming carbon dioxide and water in a second phase, which is rate contro...

Cobalt oxide catalysts supported on oxidized multi-walled carbon nanotubes (MWCNT) for the low-temperature catalytic oxidation of carbon monoxide were prepared by an impregnation-ultrasound method. These catalysts were characterized by N2 adsorption/desorption, TEM, XRD, Raman, and H2-TPR methods. The XRD and Raman results indicated that the phase of the synthesized cobalt...

carbon nanotubes were synthesized over a series of zn-containing fe/alumina catalysts by chemical vapor deposition method at two reaction temperatures of 850 and 950 °c using methane as a carbon source. catalysts were synthesized by keeping fe concentration constant and varying zn concentration to study the effects of zn. the catalysts were characterized using x – ray powder diffraction and n2 ...

h-zsm-5 nano-zeolites were synthesized by hydrothermal method using tetrapropylammonium hydroxide (tpaoh) as a template in the presence of various tpabr concentrations. the effect of different tpabr/tpaoh molar ratios was studied on the catalytic performance of dehydration of methanol to dimethyl ether (dme) in a fixed bed reactor under the same operating conditions (t=300°c, p=1 atm, and whsv=...

Amongst many strategies for renewable energy conversion, light-driven water splitting to produce clean H2 represents a promising approach and has attracted increasing attention in recent years. Owing to the multi-electron/multi-proton transfer nature of water splitting, low-cost and competent catalysts are needed. Along the rapid development of metal–organic frameworks (MOFs) during the last tw...