Bunched and multi-circularly wrapped carbon nanotubes (CNT) are observed to grow on alloy substrates based on iron group metals and copper by a microwave enhanced hot-filament method with a dilute gas of ammonia at a proper RF self-bias. The grown size of CNTs embodied in the grain sizes of conducting bulk alloy catalysts such as Cu-Ni, Cu-Fe, Cu-Co, and Cu-Ni-Fe-Co are controlled by a precurso...

Auger Electron Spectroscopy (AES) has been used to study the surface compositions of three types of nickel based chromium alloys. These alloys are IN600, IN601 and C22. AES analysis indicated the presence of chromium and oxygen on their surfaces. The formation of this chromium oxide surface layer, 3 nm thick, provides excellent corrosion resistance. For alloy C22, no molybdenum was indicated on...

The hydrogen permeance of several 0.1 mm thick Pd–Cu alloy foils (80 wt.% Pd–20 wt.% Cu, 60 wt.% Pd–40 wt.% Cu and 53 wt.% Pd–47 wt.% Cu) was evaluated using transient flux measurements at temperatures ranging from 603 to 1123 K and pressures up to 620 kPa both in the presence and absence of 1000 ppm H2S. Sulfur resistance, as evidenced by no significant change in permeance, was correlated with...

The fatigue strength, effects of a notch on the fatigue strength, and fatigue crack growth rate of Ti-15Zr-4Nb-4Ta alloy were compared with those of other implantable metals. Zr, Nb, and Ta are important alloying elements for Ti alloys for attaining superior long-term corrosion resistance and biocompatibility. The highly biocompatible Ti-15Zr-4Nb-4Ta alloy exhibited an excellent balance between...

In this study, inductive coupled plasma-optical emission spectroscopy (ICP-OES) is employed for the evaluation of soil pollution for selected metals in the Vanderbijlpark area of South Africa. Soil samples investigated were collected from five different sites in the city based on their proximity to the industrial areas of Vanderbijlpark. Soil samples were collected from close to traffic robots,...

The nanocrystallization processes in Fe-Si-B-Nb-Cu and Fe-Nd-B(-Cu-Nb) amorphous alloys have been studied by transmission electron microscopy (TEM) and a three dimensional atom probe (3DAP). Cu additions are effective in refining the nanocrystalline microstructures of an Fe74.5Si13.5B8Nb3Cu1 alloy and an Fe3B/Nd2Fe14B nanocomposite microstructure. This is because Cu atoms form a high density of...

In this research, the uptake of Cu, Mo, Zn, As(III) and Cr(VI) by mesquite (Prosopis spp.) roots and shoots from two different sources was studied. The first source was seeds collected from plants grown in mine tailings in Arizona, USA (Seeds A) and the other source was seeds from a commercial vendor (Seeds B). In addition, the effects of above mentioned elements on plant growth and nutrient up...

The TiCp/Cu master alloy was prepared via thermal explosion reaction. Afterwards, the nano-sized TiCp/Cu master alloy was dispersed by electromagnetic stirring casting into the melting Cu-Cr-Zr alloys to fabricate the nano-sized TiCp-reinforced Cu-Cr-Zr composites. Results show that nano-sized TiCp can effectively refine the grain size of Cu-Cr-Zr alloys. The morphologies of grain in Cu-Cr-Zr c...

BACKGROUND Although many studies have compared the properties of ultrasonic scaling instruments, it remains controversial as to which is most suitable for implant scaling. This study evaluated the safety and efficiency of novel metallic ultrasonic scaler tips made by the powder injection molding (PIM) technique on titanium surfaces. METHODS Mechanical instrumentation was carried out using fou...

UNLABELLED Cell culture system has been used to evaluate alloy cytotoxicity under different environments, testing the extracts, but the effect of temperature variation on the cytotoxicity of dental alloys has not been analyzed. OBJECTIVE The aim of the present study was to investigate if temperature variation could affect dental alloy cytotoxicity, testing alloy extracts in an epithelial cell...