Hydrothermally synthesized high silica borosilicates with the MFI structure was subjected to several characterization techniques. The effect of boron on the structure and acidity of HZSM-5 catalyst were studied by XRD, SEM, N2 adsorption, solid state NMR, NH3-TPD. It was confirmed that boron had entered the framework in the boron samples. The results also revealed that strong acidity was weaken...

The direct catalytic conversion of methane to liquid oxygenated compounds, such as methanol or dimethyl ether, at low temperature using molecular oxygen is a grand challenge in C-H activation that has never been met with synthetic, heterogeneous catalysts. We report the first demonstration of direct, catalytic oxidation of methane into methanol with molecular oxygen over copper-exchanged zeolit...

The methanol-to-olefin (MTO) process allows the conversion of methanol/dimethyl ether into olefins on acidic zeolites via the so-called hydrocarbon pool mechanism. However, the site and mechanism of formation of the first carbon-carbon bond are still a matter of debate. Here, we show that the Lewis acidic Al sites on the 110 facet of γ-Al2O3 can readily activate dimethyl ether to yield CH4, alk...

High selectively catalytic conversion of lignin-based phenols (m-cresol, p-cresol, and guaiacol) into para-/m-xylene was performed over Pt/HZSM-5 through hydrodeoxygenation and in situ methylation with methanol. It is found that the p-/m-xylene selectivity is uniformly higher than 21%, and even increase up to 33.5% for m-cresol (with phenols/methanol molar ratio of 1/8). The improved p-/m-xylen...

There were various problems in the determination of oil acid value of the national standard method, and this paper developed a low cost, simple and effective way to determine the acid value of oil and grease. Furthermore, the esterification of high acid Euphorbia lathyris L. oil (ELO) with methanol could be efficiently catalyzed by hydrochloric acid to produce biodiesel, and the influencing fac...

By employing anomalous X-ray powder diffraction along with support from theory and other techniques, the active copper site for methane-to-methanol conversion in zeolite omega has been determined spatially quantitatively.

The operating conditions window and experimental procedures ensuring “steady-state” operation in methanol to hydrocarbon conversion have been experimentally determined over an H-ZSM-5 zeolite with considerable acidity (Si/Al = 40).

Abstract. In PEM fuel cells pure hydrogen is used as a fuel. Due to its low density, the density of its stored energy is low, too. One of the possible solutions to the problem is production of hydrogen from the energy-reach material, e.g. methanol. Conversion of methanol to hydrogen is made with reformer in a steam reforming process in which besides methanol there is also water needed. On the o...

The esterification of free fatty acids (FFA) with methanol is studied using Sulfonated Porous Carbon (SPC) as catalyst. In compare to the amorphous sugar catalyst and protonated Nafion, the proposed catalyst shows stability and high efficient performance in biodiesel production. The highest initial rate of oleic acid conversion is obtained at catalyst loading of 1 mmol H+ and mole ra...

The desolvation of lattice methanol from between the 1D chains in {[Cu(4,4'-bipyridine)(ccnm)(2)].4MeOH} (ccnm = carbamoylcyanonitrosomethanide) under ambient conditions, a weight loss of 22.4%, results in a solid state conversion to the 3D network [Cu(4,4'-bipyridine)(ccnm)(2)].