Electrochemical noise data is commonly used to monitor corrosion of metals in various environments. In this work we use recurrence plots to study electrochemical noise time series of stainless steel AISI 316 samples immersed in mildly corrosive electrolyte. It has been found that current and potential time series reveal different information. Recurrence quantification analysis of current time s...

The Atraumatic Amniocentesis needle is manufactured by TSK Laboratory, Japan (Tochigi-Shi, Tochigi-Keri, 328 Japan). It is a 22 gauge, 90 mm needle. It has a pencil point tip with two circular holes at the tip. It is composed of a stainless steel AISI 304 with a polycarbonate hub. OD – 0.70±0.01 mm. ID – 0.40±0. 01 mm. Obturator length – 109.5±2 mm. OD of the obturator – 0.35±0.01 mm. Location ...

Thin alumina films, deposited at 280~ by low-pressure, metal-organic, chemical-vapor deposition on stainless steel, type AISI 304, were annealed at 0.17 kPa in a nitrogen atmosphere for 2, 4, and 17 hr at 600, 700, and 800~ The effect of the annealing process on the adhesion of the thin alumina films was studied using a scanning-scratch tester, type SST-IO1, developed by Shimadzu. The best mech...

Lie symmetry method is applied to find analytic solutions of initial-boundaryvalue problems of transient conduction in semi-infinite solid with constant surface temperature or constant heat flux condition. The solutions are obtained in a manner highlighting the systematic procedure of extending the symmetry method for a PDE to investigate BVPs of the PDE. A comparative analysis of numerical and...

Laser alloying is an effective method to form functional surface layers (coatings) on metallic materials, particularly stainless steels. Unique phase balance, dislocation substructure, and a possibility obtain gradient microstructures after laser slow down the degradation increase wear resistance. In this work, optimal parameters of their effects microstructure properties were investigated for ...

The in-process monitoring and real-time control of the penetration depth during laser welding is evaluated. An optical collimator collects the optical emission for measurement with a fast spectrometer. The sensor data are used to calculate the electron temperature and subsequently to determine the weld quality of overlap welds in AISI 304 stainless steel sheets performed both with CW Nd:YAG and...

Micro Electric Discharge Machining is a nontraditional machining process which can be used for drilling micro holes in high strength to weight ratio materials. This present research study deals with the single optimization of micro EDM process using Genetic Algorithm. Mathematical models using Response Surface Methodology (RSM) is used to correlate the response and the parameters. The desired r...

In this work, the mechanical properties and microstructural features of an AISI 304L stainless steel in two presentations, bulk and fibers, were systematically studied in order to establish the relationship among microstructure, mechanical properties, manufacturing process and effect on sample size. The microstructure was analyzed by XRD, SEM and TEM techniques. The strength, Young's modulus an...

In this study, two different vegetable based cutting fluids developed from refined canola and sunflower oil and a commercial type semi-synthetic cutting fluid were carried out to determine optimum conditions for tool wear and forces during milling of AISI 304 austenitic stainless steel. Taguchi L9 (3) orthogonal array was used for the experiment plan. Cutting speed, feed rate, depth of cut and ...

The chemical composition, nanostructure and electronic structure of nanosized oxide scales naturally formed on the surface of AISI 316L stainless steel microfibres used for strengthening of composite materials have been characterised using a combination of scanning and transmission electron microscopy with energy-dispersive X-ray, electron energy loss and Auger spectroscopy. The analysis reveal...