نتایج جستجو برای: main bending angle
تعداد نتایج: 740311 فیلتر نتایج به سال:
Abstract—Rotary draw bending is a method which is being used in tube forming. In the tube bending process, the neutral axis moves towards the inner arc and the wall thickness distribution changes for tube’s cross section. Thinning takes place in the outer arc of the tube (extrados) due to the stretching of the material, whereas thickening occurs in the inner arc of the tube (intrados) due to th...
The vibrational temperatures of product CO(2) were measured in CO oxidation on Pd(111) as a function of the desorption angle by means of infrared chemiluminescence. The antisymmetric vibration temperature was separately determined from the other vibrational modes from the normalized chemiluminescence intensity. The product CO(2) desorption is sharply collimated along the surface normal. The ant...
Avian wing elements have been shown to experience both dorsoventral bending and torsional loads during flapping flight. However, not all birds use continuous flapping as a primary flight strategy. The pelecaniforms exhibit extraordinary diversity in flight mode, utilizing flapping, flap-gliding, and soaring. Here we (1) characterize the cross-sectional geometry of the three main wing bone (hume...
OBJECTIVE Non-fatal tibia and ankle injuries without proper protection from the restraint system has gotten wide attention from researchers. This study aimed to investigate occupant tibia and ankle injuries under realistic frontal impact environment that is rarely considered in previous experimental and simulant studies. METHODS An integrated occupant-vehicle model was established by coupling...
This paper describes the Lyapunov-based force control suppressing the coupled bending and torsional vibrations of a one-link flexible arm with a rigid tip body. On the basis of the distributed parameter model, the output feedback control law is constructed using Lyapunov method, and the asymptotic stability of the closedloop system is proved. The proposed controller consists of the PD feedback ...
Foraging is a rapid, side-to-side movement of the nose generated by Caenorhabditis elegans as it explores its environment. In this paper, we present an automated method to detect and analyze foraging behavior of C. elegans in a video sequence. Several morphological image-processing methods are used to locate the precise nose position of the worm in each image. Then foraging events are detected ...
Crystals bent to logarithmic spirals have been used in applications where large acceptance of divergent x-rays from a small source is needed [1]. Small acceptances can be easily handled with cylindrically bent crystal. In cases where larger acceptances are needed differential bending may be adequate [2]. However, the largest acceptance is obtained from a flat crystal plate when bent into the lo...
The beamline BL43IR at SPring-8 has been constructed as a beamline exclusively dedicated to the infrared spectroscopy. The beamline was designed to make use of infrared synchrotron radiation emitted from a bending magnet of 39.3m bending radius with the acceptance angle of 36.5(H) 12.6(V)mrad and to cover a very wide wavelength range from 500 nm (20,000 cm , 2.5 eV) to 100mm (100 cm , 12.5meV)....
We present a combined quantum mechanics and molecular mechanics study of the deep ultraviolet ππ* resonance Raman spectra of β-sheet amyloid fibrils Aβ(34-42) and Aβ(1-40). Effects of conformational fluctuations are described using a Ramachandran angle map, thus avoiding repeated ab initio calculations. Experimentally observed effects of hydrogen-deuterium exchange are reproduced. We propose th...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید