Conventional seismic rehabilitation methods may not be suitable for some buildings owing to their high cost and time-consuming foundation work. In recent years, viscoelastic dampers (VEDs) have been widely used in many mid- and high-rise buildings. This study introduces a viscoelastic passive control system called rotary rubber braced damper (RRBD). The RRBD is an economical, lightweight, and e...

Abstract: This paper presents an in-wheel vibration absorber for in-wheel-motor electric vehicles (IWM EVs), and a corresponding control strategy to improve vehicle ride comfort. The proposed in-wheel vibration absorber, designed for suppressing the motor vibrations, is composed of a spring, an annular rubber bushing, and a controllable damper. The parameters of the in-wheel spring and rubber b...

The development of control systems for a two degreeof-freedom vibration suppression system using a magnetorheological (MR) fluid damper is the subject of this paper. It is assumed that system encounters impulsive disturbance forces. The objective is to use the (MR) fluid damper for the position control and vibration suppression of the payload. The control force is generated by regulating the el...

The vulnerability of the UHV porcelain arrester is very high under strong earthquake. To rise seismic reliability of the UHV porcelain arrester, a new type lead damper, which is a new patent product, is installed at the bottom of the equipment. To investigate the damping effect of the dampers, the experimental research and finite element analysis on seismic behavior of the UHV porcelain arreste...

When a spacecraft lands, a large shock load can lead to undesirable responses such as rebound and tripping. The authors previously discussed the problem of controlling these shock responses using momentum exchange impact dampers. An active/passive hybrid momentum exchange impact damper, which included an active actuator, was proposed. Themomentum exchange impact dampers’ performances are evalua...

This paper presents a semi-active strategy for seismic protection of a benchmark cable-stayed bridge with consideration of multiple-support excitations. In this control strategy, Magnetorheological (MR) dampers are proposed as control devices, a LQG-clipped-optimal control algorithm is employed. An active control strategy, shown in previous researches to perform well at controlling the benchmar...

This paper describes a comparison, both analytically and experimentally, between two widely used loss factor estimation techniques frequently used in statistical energy analysis. Analytical models of simple spring/mass/damper systems were created to compare frequency-averaged loss factor values from the single subsystem power injection method and the impulse response decay method. The parameter...

This paper studies the solution behavior of a system of two coupled elastic beams connected vertically by springs. With the viscous damping collocated with the ends of the springs, the system energy decays exponentially. Our goal is to find the optimal spring-damper location which yields the best energy decay rate of the beam-spring system.

In this work, three types of vehicle suspensions were considered and modeled as follows: oil damper mounted in parallel with a compression helical spring, for which a Kelvin-Voigt model, consisted of a dashpot and an elastic element connected in parallel is considered; colloidal damper without attached compression helical spring, for which a Maxwell model, consisted of a dashpot and an elastic ...