The effect of temperature on the equilibrium sorption of Pb 2+ from aqueous solution onto a low-cost electric furnace slag was investigated. In this paper, two-parameter isotherm models namely the Langmuir and the Freundlich and three-parameter isotherm model namely Redlich–Peterson were applied to describe the isotherms and to calculate their constants. The best estimation of the parameters of...

Ohio has substantial lands impacted by surface mining for coal and an active steel industry. Steel industry slags have been used as liming compounds for agriculture and acid mine soil reclamation. This 3-year study evaluates slags from Ohio steel mills in greenhouse trials where these materials are compared to reagent grade CaCO 3 in their ability to improve plant growth on acid mine soil. The ...

Optical microscopy, total oxygen measurements and slime tests have been conducted to quantify the size distribution and amount of inclusions at various processing steps during basic oxygen furnace (BOF) based steel production at Baosteel. The effects on steel cleanliness of specific operational improvements during steel refining and continuous casting have been investigated. Such improvements t...

In this study, the effects of titanium dioxide (TiO₂) nanoparticles on the sulfate attack resistance of ordinary Portland cement (OPC) and slag-blended mortars were investigated. OPC and slag-blended mortars (OPC:Slag = 50:50) were made with water to binder ratio of 0.4 and a binder to sand ratio of 1:3. TiO₂ was added as an admixture as 0%, 3%, 6%, 9% and 12% of the binder weight. Mortar speci...

The slagging and fouling characteristics of the heat recovery steam generator (HRSG) for ferrosilicon electric furnaces are discussed in this paper. Three ash samples were taken from the HRSG of a ferrosilicon furnace in Ningxia Province, China, which suffered from serious slagging and fouling. X-ray fluorescence (XRF), X-ray powder diffraction (XRD) and scanning electron microscope (SEM) were ...

Stabilisation of natural pavement materials to make road pavements is widespread in South Africa, using cement and lime as cementitious binders. The rapid speed of the cementing reaction limits these to plant based construction. Some hydraulic binders have the potential to be developed for Labour Intensive Construction stabilisation technology because their slow hydration reaction allows time t...

The construction industry is the largest consumer of natural resources which led to depletion of good quality natural sand (Fine aggregates). This situation led us to explore alternative materials and granular slag a waste industrial byproduct is one such material identified for utilization it as replacement of natural sand. This paper highlights upon the feasibility study for the utilization o...

Most approaches to grasp planning assume that the configurations of the object to be grasped and any potential obstacles are known perfectly. As a result, implementations of these “perfect information” approaches to grasp synthesis are necessarily preceded by a perception stage where the the state of the object and obstacles are estimated. Unfortunately, small perceptual errors during the perce...

The corrosion behavior of three sorts of refractories based on alumina-graphite were studied by immersion tests. The melts included smelting reduction molten slag and corresponding carbon saturated molten iron. The influence of test temperature, FeO content in slag and specimen rotative velocity on the corrosion rate of refractories was examined. By means of SEM and EDS, the microstructure chan...

We aimed to study the characteristics and the mechanism of the cumulative release of antimony at an antimony smelting slag stacking area in southern China. A series of dynamic and static leaching experiments to simulate the effects of rainfall were carried out. The results showed that the release of antimony from smelting slag increased with a decrease in the solid-liquid ratio, and the maximum...