This paper presents a novel approach to design robust source coupled logic for implementing ultra low power circuits. In this paper, we proposed two different source coupled logic structures and analyzed the performance of these structures with STSCL. The first design we used DTPMOS as load device and analyses the performance of DTSCL Logic with previous source coupled logic for ultra low power...

|We use a laser range nder with a scanning mirror on a panning platform to acquire range data in a local environment (range < 15m). In this paper, we discuss the hardware components, the software, show several examples of the range data, and discuss problematic issues such as material properties. We conclude with our future plans for improving the data and integrating it into our research progr...

InGaAs quantum wells and a Bragg mirror structure are grown on a GaAs substrate to simultaneously serve as a low-loss saturable absorber and an output coupler for highly efficient Q switching of a diode-pumped Nd:YAG laser operating at 946 nm. With an incident pump power of 9.2 W, the laser produces pulses of 38 ns duration with average pulse energy of as much as 20 microJ at a pulse repetition...

We demonstrated nonlinear mirror mode-locking of a diode-pumped Nd:GdVO4 laser by using a 10 mm long KTP crystal. The stable CW mode locking can be reached with the relative low threshold pump power as low as 2.3W. The highest output power of 2.65W at the 10 W pump powers are generated with the 121-MHz repetition rate of pulses. It confirms the excellent laser performance of the Nd:GdVO4 for hi...

We present a new sample holder compatible with ELMITEC Photoemission Electron Microscopes (PEEMs) containing an optical lens and a mirror. With the integrated optical elements, a laser beam is focused from the back side of the sample at normal incidence, yielding a minimum spot size of about 1 μm. This opens up new possibilities for local laser excitations in PEEM experiments such as imaging al...

Simultaneous frequency and amplitude stabilization of a commercial internal-mirror He-Ne laser by a new simple method is reported. In this method, the back beam intensity of one polarization of the orthogonally polarized modes is fed back as a heater current to control the cavity length of the laser. The relative frequency stability and amplitude stability achieved are, respectively, +2.5 X 10-...

We report the experimental observation of the coexistence of polarization-locked vector solitons (PLVSs) and polarization-rotating vector solitons (PRVSs) in a fiber laser mode locked with a semiconductor saturable absorber mirror. It was found experimentally that interaction between the PLVSs in a fiber laser could lead to formation of bound states of PRVSs. Moreover, the bound PRVSs as a unit...

We report experimental results on a highly efficient optical limiter that uses a three-mirror, multipass ring configuration. The optical limiter's enhanced performance is based on the accumulative effect that is achieved when the laser beam passes through the sample several consecutive times. Its feasibility was demonstrated for media with different limiting action processes, namely, reverse sa...

A stretched-pulse fiber laser with a nonlinear optical loop mirror (NOLM) that produces 100-fs pulses with 1-nJ energy is demonstrated. These results constitute a 30-fold increase in pulse energy over previously reported femtosecond fiber lasers with a NOLM. Compared with previous stretched-pulse lasers, this laser offers a cleaner spectrum and improved stability, with comparable pulse duration...

We demonstrate self-starting passive mode locking of a Cr (4+):YAG laser, using an intracavity nonlinear mirror as a saturable absorber. The pump source is a diode-pumped Nd:YVO(4) laser. Output pulses are centered at 1541 nm, with 26-nm spectral bandwidth and 110-fs pulse width. Output powers of 70 mW are obtained with 8 W of pump power. This mode locking technique is compared with Kerr-lens m...