Numerical simulations of unsteady flow in a Hartmann resonance tube are carried out with the goal of understanding the effect of jet Mach number on the flow characteristics. The device, which consists of a convergent nozzle facing a closed end tube produces a nearly normal shock that fluctuates in the gap between the nozzle and the tube. Numerical solutions were obtained for the unsteady Reynol...

abstract in this study, the effect of suspended load transport on the characteristics of submerged hydraulic jump (shj) in a rectangular channel was investigated experimentally. sediment concentration and jet froude numbers in the range of 0.424%-16.15% and 1.93-4.96, respectively, were considered. tow grain size 0.15 and 0.03 mm were used in the experiments. characteristics of submerged hydrau...

We present a simple analytical model for the forces that determine jet diameter during electrospinning as a function of surface tension, flow rate, and electric current in the jet. The model predicts the existence of a terminal jet diameter, beyond which further thinning of the jet due to growth of the whipping instability does not occur. Experimental data for various electrospun fibers attest ...

Computational results are presented for the unsteady flow in a powered Hartmann resonance tube. The results were obtained using the WIND code for the two dimensional viscous flow in a five-block solution domain that includes the CD nozzle supplying the jet to the closed end tube within the ambient surrounding. The computed results are presented for the unsteady flow mechanisms involved in the r...

Stainlesssteel 403 is high-alloysteelwith good corrosion resistance and it’svery hard material. Abrasive water jet is an effective method for machining, cutting and drilling of stainlesssteel 403. In thispaperweoptimize the metalremoval rate of stainlesssteel 403 in abrasive water jet machining. The MRRisoptimize by usingthreeparameters water pressure, abrasive flow rate and stand-off distance ...

Asymptotic approximations for small Strouhal number are derived for the solution of the problem of the interaction between an acoustic wace and a subsonic jet flow issuing from a semi-infinite pipe. Density and sound speed differences between the jet flow and the (slowly moving) ambient medium, and a general edge condition are included. The approximations relate to the field inside the jet flow...

This paper deals with the optimization of a synthetic jet actuator parameters in the control flow around the NACA0015 airfoil at two angles of attack: 13° (i.e. the stall angle of NACA0015) and 16° (i.e. the post stall angle of NACA0015) to maximize the aerodynamic performance of the airfoil. Synthetic jet actuator is a zero mass flux-active flow control device that alternately injects and remo...

In the laboratory we used an idealized rotorwash flow—an axisymmetric jet impinges normally on a packed bed of cohesionless particles—and measured the spatially varying flow field and entrainment flux under an axisymmetric jet over a range of jet exit velocities and bed materials. We found that the erosion of the bed is driven by turbulent surface shear stress, quantified by the turbulent kinet...

The azimuthal anisotropy of jet spectra due to energy loss of jet partons in azimuthally non-symmetric volume of dense quark-gluon matter is considered for semi-central nuclear interactions at collider energies. We develop the techniques for event-by-event analysing jet azimuthal anisotropy using particle and energy elliptic flow, and suggest the method for calculating coefficient of jet azimut...