Shell and Tube heat exchangers are the heat exchangers that are most widely used in industries and for other commercial purposes. There are many techniques that have been utilized to enhance the heat transfer performance of the shell and tube heat exchangers. Air bubble injection is one of the promising and inexpensive techniques that can create turbulence in the fluids resulting in to enhancem...

The single-phase flow and thermal performance of a double pipe heat exchanger are examined by experimental methods. The working fluid is water at atmospheric pressure. Temperature measurements at the inlet and outlet of the two streams and also at an intermediate point half way between the inlet and outlet is made, using copper-constantan thermocouple wires. Mass flow rates for each stream are ...

The purpose of this research is to analyze heat waves characteristics in the warm period of the year as a climatic hazard in Iran. In this study, the daily maximum temperature is taken at 44 synoptic stations during the period 1981-2010. These temperature values were used to extract the intensity, frequency and duration of heat waves using percentile thresholds of 90, 95, and 98. The results sh...

introduction nowadays, due to higher environmental pollution and decreasing fossil fuels many countries make decisions to use renewable fuels and restrict using of fossil fuels. renewable fuels generally produce from biological sources. biodiesel is an alternative diesel fuel derived from the transesterification of vegetable oils, animal fats, or waste frying oils. considering the differences be...

introduction: photonics refers to the technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. photonic technology in the meridian and acupoints research has shown the unique advantages, by which the microcosmic material basis and macroscopic phenomena research can be integrated to interpret the occurrence of propagated sensation along me...

In this paper, a three-dimensional finite element model has been developed to simulate the laser-TIG hybrid welding (HLAW) of stainless steel 1.4418 with thickness of 4 mm. Transient temperature profile and dimensions of the fusion zone and heat affected zone (HAZ) during welding process are calculatedusing finite element method (FEM) and were solved in the ABAQUS/Standard software.The heat sou...

Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...