Reasons for Coating Concrete Some reasons for coating concrete are unique to the structures in question while other reasons apply to coating any substructure. The major reasons for coating concrete include • enhancing appearance with respect to colour, gloss, or texture for architectural purposes; • reducing moisture permeability, which can otherwise lead to freeze-thaw damage, rebar corrosion,...

In severe conditions, braking may cause the temperature on the disc-pad interface to rise up to 800 °C 1 . At such a temperature, the properties of organic compounds are disrupted, coefficient of friction (CoF) decreases, and the rate of wear increases exponentially. This phenomenon is called “fade” 2 . Ideal brake pads, without causing any fades, are expected to function in uniform and stable ...

Tribological coatings of yttria stabilized zirconia (YSZ), gold, diamond like carbon (DLC) and MoS2 were synthesized using magnetron assisted pulsed laser deposition (MSPLD). The coatings were synthesized in four-component and three-component combinations that included YSZ/Au/DLC/MoS2, YSZ/Au/MoS2, and YSZ/Au/DLC. A range of coating compositions was studied to explore coating optimization for l...

Subject of research: coatings based on TiN deposited by pulsed magnetron sputtering have been studied.
 Purpose is to establish the effect technological parameters process sputtering: discharge current and N2 content in vacuum chamber structure phase composition TiN.
 Methods objects structural characteristics TiN-based coating were studied course X-ray diffraction analysis coatings. ...

NiCrMoY alloy powders were prepared using inert gas atomization by incorporation of rare earth elements, such as Mo, Nb, and Y into Ni60A powders, the coatings were sprayed by oxy-acetylene flame spray and then remelted with high-frequency induction. The morphologies, hollow particle ratio, particle-size distribution, apparent density, flowability, and the oxygen content of the NiCrMoY alloy po...

This study aims to evaluate the structural, mechanical and tribological properties of zirconium carbonitrides (ZrCxN1-x) coatings with embedded silver nanoparticles, produced with the intention of achieving a material with enhanced multi-functional properties, including mechanical strength, corrosion resistance, tribological performance and antibacterial behavior suitable for their use in joint...

Abstract Fusion-bonded and low-diluted overlay welded coatings are frequently very thick (>1mm). High-speed laser cladding is a novel process capable of producing thin fusion-bonded with high coverage rates low heat input. In this study, for the first time, high-speed was used to fabricate relatively Ni-based reinforced chromium carbides onto low-alloy structural quenched tempered steels. Ob...

Two ultrasonic nondestructive evaluation methods have been applied to systematically characterize the mechanical properties of nanostructured physical vapor deposited diamond-like carbon (DLC) ultra-hard coatings. A photoacoustic guided-wave technique is used to generate broadband surface acoustic waves (SAW) on the coating surfaces, and dispersion relations of the SAW for DLC coatings are meas...

A broad array of carbon-based thin films, such as diamond, diamond-like carbon (DLC), and others, have been developed over the last several years [1]. These materials exhibit high strength and stiffness, low friction and wear, tolerance to withstand harsh physical and chemical conditions, and can form smooth, continuous, conformal coatings. This has resulted in their use in a wide range of appl...

It is well known that injection of glass fibre–reinforced plastics (GFRP) causes abrasive wear in moulds’ cavities and runners. Physical vapour deposition (PVD) coatings are intensively used to improve the wear resistance of different tools, also being one of the most promising ways to increase the moulds’ lifespan, mainly when used with plastics strongly reinforced with glass fibres. This work...