Four different ceria supported catalyst were prepared by impregnation method with Pt(NO3)2 solution. The two supports are commercially available (MaTeck) and the other two were prepared by precipitation and microwave assisted hydrothermal method (MAH) respectively. The phase composition and average crystallite size of the catalysts were characterised with XRD technique. Finally the catalytic ac...

Using High Throughput Experimentation Approach for the Evaluation of Dehydrogenation Catalysts: Potential Interests and Drawbacks — Linear monoolefins with 10 to 14 carbon atoms are intermediates in the manufacture of biodegradable detergent products. These olefins can be obtained industrially by dehydrogenation of long chain paraffins on specific dehydrogenation catalysts under suitable operat...

In-situ liquid-phase hydrogenation of m-chloronitrobenzene (m-CNB) based on aqueous-phase reforming (APR) of ethanol and catalytic hydrogenation was carried out over Fe-modified Pt/carbon nanotubes (CNTs) catalysts. The effects of Pt loading over CNTs and Fe modification on the catalytic performance of Pt/CNTs catalysts were studied. In-tube loading of Pt particles, compared with out-tube loadi...

The development of active, cost-effective and stable oxygen-evolving catalysts is one of the major challenges for solar-to-fuel conversion towards sustainable energy generation. Iridium oxide exhibits the best available compromise between catalytic activity and stability in acid media, but it is prohibitively expensive for large-scale applications. Therefore, preparing oxygen-evolving catalysts...

Supported metal oxide based olefin metathesis catalysts are widely used in the chemical industry. In comparison to their organometallic catalyst cousins, the oxide catalysts have much lower activity due to the very small fraction of active sites. We report that a simple pretreatment of MoO3/SiO2 and WO3/SiO2 under an olefincontaining atmosphere at elevated temperatures leads to a 100−1000fold i...

At IMM the advantages of an alternative synthesis route for biodiesel under supercritical conditions in micro-structured reactors applying heterogeneous catalysts are currently under investigation. Target of the development work is to build a pilot plant with an annual production capacity of 40 t which covers all process engineering steps and verifies their functionality in laboratory and field...

High-performance Cu/ZnO/(Al(2)O(3)) methanol synthesis catalysts are conventionally prepared by co-precipitation from nitrate solutions and subsequent thermal treatment. A new synthesis route is presented, which is based on similar preparation steps and leads to active catalysts, but avoids nitrate contaminated waste water.

Two novel succinimide-based palladium complexes, AsCat and FurCat, are highly efficient catalysts for room-temperature Stille cross-coupling of organostannanes with benzyl chlorides. The air- and moisture-stable catalysts are prepared in one step, and the coupling reactions proceed with a high selectivity for the benzyl position under mild conditions without the need for additives.

the potential of carbon nanotubes (cnt) supported cobalt catalysts for fischer-tropsch (ft) reaction is shown. using the wet impregnation method cobalt on carbon nanotubes catalysts were prepared with cobalt loading varying from 15 to 45 wt. %. the catalysts are characterized by different methods including: bet physisorption, x-ray diffraction, hydrogen chemisorption, and temperature-programmed...

Gold nanoparticles, particularly with the particle size of 2–5 nm, have attracted increasing research attention during the past decades due to their surprisingly high activity in CO and volatile organic compounds (VOCs) oxidation at low temperatures. In particular, CO oxidation below room temperature has been extensively studied on gold nanoparticles supported on several oxides (TiO2, Fe2O3, Ce...