Researchers have been focused on the influences of flowing fluid on the corrosion of bare metals, but there is little emphasis on the degradation of metal-protective coating. Evaluating the metal-protective coating usually uses the Electrochemical Impedance Spectroscopy (EIS) method. EIS is a technique used for evaluating coating permeability or barrier performance based on the electrical imped...

Novel scaffolds composed of poly(L-lactic acid) (PLLA) skeleton covered with bonelike apatite or apatite/collagen composite were produced via a combined phase-separation technique and an accelerated biomimetic coating process. Saos-2 osteoblast-like cells were used to evaluate the cellular behaviors on these biomimetic coatings. Cell morphologies on the surfaces of PLLA scaffolds, PLLA scaffold...

in this research, b4c-ni cermet coating was sprayed on the surface of 4130 steel from b4c and ni feed-stockpowders using high velocity oxy-fuel (hvof) method. in order to characterize the tribological behavior of thecoating, ball on disk wear tests were done at the ambient temperature and under the loads of 1, 3 and 5 n.phase analysis of the coating after spraying was studied by x-ray diffracto...

Scalable methods, PRINT particle fabrication, and spray-assisted Layer-by-Layer deposition are combined to generate uniform and functional nanotechnologies with precise control over composition, size, shape, and surface functionality. A modular and tunable approach towards design of built-to-order nanoparticle systems, spray coating on PRINT particles is demonstrated to achieve technologies cap...

A novel cobalt-free Cu1.2Mn1.8O4 spinel coating is prepared and evaluated for the metal interconnect of solid oxide fuel cell. Mn-35Cu and Co-35Mn alloy coatings are deposited on 430 SS substrate and then in-situ oxidized in air at 750 ◦C for 100 h. XRD results confirm that Cu1.2Mn1.8O4 spinel with some Mn2O3 is formed, and the average thickness of the coating is 70–80 μm according to cross sec...

Carboxylated SiO2-coated α-Fe nanoparticles have been successfully prepared via CaH2-mediated reduction of SiO2-coated Fe3O4 nanoparticles followed by surface carboxylation. These α-Fe-based nanoparticles, which are characterized by ease of coating with additional functional groups, a large magnetization of 154 emu per g-Fe, enhanced corrosion resistivity, excellent aqueous dispersibility, and ...

Superhydrophobic surfaces were fabricated by the complex coating of silica nanoparticles with functional groups onto cotton textiles to generate a dual-size surface roughness, followed by hydrophobization with stearic acid, 1H, 1H, 2H, 2H-perfluorodecyltrichlorosilane or their combination. The wettability and morphology of the as-fabricated surfaces were investigated by contact angle measuremen...

epoxy powder coatings containing zinc aluminum phosphate (zap) and zinc phosphate (zp), which are the 2nd and 1st generation of phosphate-based pigments respectively, were applied to the surface of mild steel sheets. the anticorrosive performances of the coated samples were studied using electrochemical impedance spectroscopy (eis). cathodic disbonding resistance and the adhesion performance of...

Bacteria are difficult to be eliminated because of their multi-drug resistance, which brings significant threats public health. Among the antibacterial methods, mechanobactericidal surfaces provide a possible approach solving this problem. In study, generally used mechanical sterilization is developed by fabricating nanostructured coating. The functional coating simply fabricated growing zeolit...

BACKGROUND Immobilizing bioactive molecules and osteoconductive apatite on titanium implants have investigated direct ossification. In this study, hydroxycholesterol (HC) was immobilized with apatite on titanium through simply adsorption or sandwich-like coating. Three kinds of hydroxycholesterol were chosen to induce ossification: 20α-hydroxycholesterol (20α- HC), 22(S)-hydroxycholesterol (22(...