The turbulent flow field generated in a baffled stirred tank was computed by large eddy simulation (LED) and the flow field was developed using the Sliding Mesh (SM) approach. In this CFD study, mixing times and power number have been determined for a vessel agitated by a 6-blade Rushton turbine. The predicted results were compared with the published experimental data. The satisfactory results ...

In this paper we present the latest developments in the design, fabrication and application of single and arrays of biomimetic hair flow-sensors towards high-resolution air-flow imaging. Redesigning the electrode system of the hair sensor (using SOI wafer technology) has led to improve the detection limit down to 1 mm/s air-flow amplitude using 3 kHz measurement bandwidth. SOI technology facili...

water obtained from any source may contain impurities induced by erosion, dissolved minerals, dissolved gases and material produced from organic matter decomposing. if the amount of these substances exceed a certain limit, not only the water would not be potable, but the water containing the material will not be suitable to be used in most applications, or at least before treatment cannot be ap...

temperature restrictions on aqueous effluents dictate that streams with a temperature higher than the permitted level needed to pass through cooling systems to reduce the effluent temperature before discharge. in this study, by considering the grouping design rules based on pinch technology, an optimum design for a distributed effluent cooling system, has been developed. a counter-flow wet cool...

Free convection flow in an enclosure filled with a congealing melt leads to the product with a nonuniform structure involving large grains. The convective flows are decreased by applying an appropriate magnetic field, obtaining uniform and small grain structures. In this work, using the finite volume method, we investigated the application of a magnetic field to the convective heat transfer and...