A multivariable control scheme is designed to minimize emission of nitrogen oxides NOx and generation of smoke in a Diesel engine equipped with a variable geometry tur bocharger VGT and an external exhaust gas recirculation system EGR Steady state optimization results in operat ing points where NOx emissions and smoke generation are highly coupled and require joint management by VGT and EGR act...

The necessity for decrease in consumption of conventional fuel, related energy and to promote the use of renewable sources such as biofuels, demands for the effective evaluation of the performance of engines based on laws of thermodynamics. Energy, exergy, entropy generation, mean gas temperature and exhaust gas temperature analysis of CI engine using diesel and karanja methyl ester blends at d...

Nowadays, increased attention has been focused on internal combustion engine fuels. Regarding environmental effects of internal combustion engines particularly as sources of pollution and depletion of fossil fuels, compressed natural gas has been introduced as an alternative to gasoline and diesel fuels in many applications. A high research octane number which allows combustion at higher co...

To achieve energy saving and emission reduction for vehicle diesel engines, the organic Rankine cycle (ORC) was employed to recover waste heat from vehicle diesel engines, R245fa was used as ORC working fluid, and the resulting vehicle diesel engine-ORC combined system was presented. The variation law of engine exhaust energy rate under various operating conditions was obtained, and the running...

In this study the performance and emissions characteristics of a heavy-duty, direct injection, Compression ignition (CI) engine which is specialized in agriculture, have been investigated experimentally. For this aim, the influence of injection timing, load, engine speed on power, brake specific fuel consumption (BSFC), peak pressure (PP), nitrogen oxides (NOx), carbon dioxide (CO2), Carbon mon...

A comprehensive study on the methanol as an alternative fuel has been carried out. A four stroke four cylinder diesel engine was adopted to study engine power, torque, break specific fuel consumption, break thermal efficiency and exhaust temperature with the fuel of fraction methanol in diesel. In this study, the diesel engine was tested using methanol blended with diesel at certain mixing rati...

hydrogen is seen as one of the important energy carriers of the future with potential to reduce local as well as global warming. the main by-product of the combustion of hydrogen in air is water vapor and trace quantities of oxides of nitrogen. an experiment was conducted to study the impact of hydrogen/natural gas blends on performance, thermodynamic efficiency and exhaust gas emissions in a r...

The aim of this work is to investigate the influence of NO/SO2 on the emissions of N2O from diesel engine. A direct-injection diesel engine (model NF-19SK YANMAR) one cylinder was employed to test the emission. This engine works on fourstroke cycle and was operated at 2200 rpm by 25, 50, and 75% engine load. The experiment by three level sulfur content of fuel by adding DBDS into MDO and experi...

This paper investigates the opportunity of using almond oil as a renewable and alternative fuel source. Different fuel blends containing 10, 30, and 50% almond biodiesel (B10, B30, and B50) with diesel fuel (B0) were prepared and the influence of these blends on emissions and some performance parameters under various load conditions were inspected using a diesel engine. Measured engine performa...

Implementation of real-time combustion feedback for use in closed-loop combustion control is a technology that has potential to assist in the successful production implementation of advanced diesel combustion modes. Low-temperature, pre-mixed diesel combustion is presently of interest because it offers the ability to lower the engine-out emissions of oxides of nitrogen (NOx) and particulate mat...