background : widespread use of x-band frequency (a part of the super high frequency microwave) in the various workplaces would contribute to occupational exposure with potential of adverse health effects.  according to limited study on microwave shielding for the workplace, this study tried to prepare a new microwave shielding for this purpose. methods: we used ei-403 epoxy thermosetting resin ...

the corrosion protection of mild steel by a newly developed epoxy-based coating system containing inherently conducting nanopolyaniline-clay as a nanoadditive has been studied. polyaniline-clay anticorrosion nanoadditive (pcna) was obtained by the direct mixing method of nanopolyaniline (0.03 wt.%) and organo-modified clay (3 wt.%) at atmospheric pressure, and xrd technique was used to study d-...

in this research, mesoporous silica was applied as the host of corrosion inhibitor (molybdate). the loaded mesoporous silica was dispersed in an epoxy matrix. the composite was then coated on the mild steel plate. results showed that the corrosion resistance of the scratched epoxy/mesoporous silica loaded by molybdate was better than the one without molybdate or neat epoxy. on the other hand, e...

In this research, graphene oxide (GO) nanoparticles were modified by second and fourth generations of poly(amidoamine) dendrimers in order to improve the particle dispersion quality in the epoxy matrix and therefore its barrier anti-corrosion performance. Confirmation on the GO surface modification by Polyamidoamine generation 2 (PAMAM2) and polyamidoamin generation 4 (PAMAM4) was carried o...

In this paper, electrochemical behavior of epoxy paints embedded by modified calcium carbonate particles was investigated during exposure to 3.5 wt% NaCl solution. The precipitated calcium carbonate (PCC) and ground calcium carbonate (GCC) particles were utilized as inexpensive filler for epoxy paints. Electrochemical impedance spectroscopy (EIS), polarization tests and pin-on-disk method w...

The influence of nanoclay on the impact damage resistance of glass fiber–epoxy composites has been investigated using high-velocity repeated ice impact tests. The incorporation of nanoclay into epoxy enhances the impact resistance of the composites. The impact of ice is a realistic scenario for composite structures such as aircraft fuselages, wing skins and fan blades and it is not a completely...

The epoxy coatings containing multi-walled carbon nanotube/ poly ortho aminophenol nanocomposite were prepared and used as anticorrosive coatings. The nanocomposites with different contents of carbon nanotube were synthesized in a solution of sodium dodecyl sulfate and ammonium peroxy disulfate as a surfactant and an oxidant, respectively. The morphology and structural properties were confirmed...

Thermally reduced graphene nanoplatelets were covalently functionalised via Bingel reaction to improve their dispersion and interfacial bonding with an epoxy resin. Functionalised graphene were characterized by microscopic, thermal and spectroscopic techniques. Thermal analysis of functionalised graphene revealed a significantly higher thermal stability compared to graphene oxide. Inclusion of ...

The toughness and coefficient of thermal expansion of a series of functionalized graphene sheet epoxy nanocomposites are investigated. Functionalized graphene sheets are produced by splitting graphite oxide into single graphene sheets through a rapid thermal expansion process. These graphene sheets contain ~ 10% oxygen due to the presence of hydroxide, epoxide, and carboxyl functional groups wh...

A new epoxy embedding mixture has been developed utilizing Maraglas 655 and Cardolite NC-513 with benzyldimethylamine (BDMA) as a curing agent. This epoxy mixture permits cellular preservation comparable to that obtained with Epon 812, ease of preparation of tissues, a wide range of miscibility, low viscosity, and, most important, ease of sectioning on a Porter-Blum microtome. In contrast to Ep...