In this paper, a high-conversion-ratio bidirectional dc–dc converter with coupled inductor is proposed. In the boost mode, two capacitors are parallel charged and series discharged by the coupled inductor. Thus, high step-up voltage gain can be achieved with an appropriate duty ratio. The voltage stress on the main switch is reduced by a passive clamp circuit. Therefore, the low resistance RDS(...

This paper presents a design and performance analysis of tunable RF front end circuits such as RF band pass filter and VCO for multiband applications. The tunable element is an active inductor, built by MOS transistors. It is attractive due to its tunable and larger inductance values. The RF band pass filter is realized using active inductor with suitable input and output buffer stages. The tun...

In this paper, a novel high step-up DC-DC converter for distributed generation (DG) system is proposed. The concept is to utilize two capacitors and one coupled-inductor. The two capacitors are charged in parallel during the switch-off period and are discharged in series during the switch-on period by the energy stored in the coupled inductor to achieve high stepup voltage gain. In addition, th...

Design and Implementation of highly efficient Reflective type phase shifters (RTPS) at 60GHz has been proposed in this work. Low loss cost effective design which utilizes less chip area is proposed. At high frequencies, to improve the efficiency of the communication system highly directional high gain antennas have to be used. Phase shifters are one of the most important elements in phased arra...

Abstract A new approach for modeling steady state inductively coupled radio frequency discharges at low pressure is described. simple one-dimensional model considered, which includes Maxwell’s equations and the electron balance equation with boundary conditions of third kind. It shown that system value problems a two-parameter partial eigenvalue problem. The smallest problem magnetic field stre...

This article proposes a method for modeling electric devices based on Cauer circuit whose parameters are directly determined from measured or computed data using the adjoint variable method. It has been shown that governed by quasi-static Maxwell's equation can be modeled circuit. From synthesized circuit, eddy current losses evaluated wide frequency range. Moreover, it embedded into simulator ...

Efficient wireless energy transfer between two inductor-capacitor circuits has been demonstrated by applying the principles of Coupled Mode Theory to create a system of strongly-coupled, resonating magnetic fields. This paper makes a detailed analyzes how Coupled Mode Theory is used to increase energy transfer between two simple inductor-capacitor circuits.

A new 3-D solenoid-inductor structure that is compatible with standard CMOS technology is proposed. Simulation shows excellent area efficiency of more than 80% saving over conventional planar spiral inductor. If combined with post-micromaching, a peak quality factor greater than 10 at 30GHz can be realized.

Modeling and performance of on-chip spiral inductors is presented. Y-parameters are obtained from the measured S-parameters of the inductor fabricated in 0.35-μm SOI CMOS technology. Matlab is used to get the π-equivalent circuit model parameters at each frequency point. The SOI CMOS inductor shows better performance characteristics in terms of Q-factor and self-resonance frequency.

Battery management systems (BMS) are a key element in electric vehicle energy storage systems. The BMS performs several functions concerning to the battery system, its key task being balancing the battery cells. Battery cell unbalancing hampers electric vehicles’ performance, with differing individual cell voltages decreasing the battery pack capacity and cell lifetime, leading to the eventual ...