Fitting data to classical creep rupture models can result in unrealistically high extrapolated long-term strength. As a consequence, the standard strength values for new steel grades have frequently needed downward correction after obtaining more long-term test data. The reasons for non-conservative extrapolation include the influence of short-term data, which are easiest to produce but tend to...

Normal temperature tensile and fatigue tests were adopted to test the mechanical performance and fatigue life of 2524 aluminum alloy under the three states of T3, artificial aging, and creep aging, and scanning electron microscope and transmission electron microscope were also used to observe the fatigue fracture morphology and aging precipitation features of the alloy under the above three sta...

P. Mohyla, R. Cep, Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, Czech Republic; Z. Kubon, Materials and Metallurgical Re search, Lt d., Cz ech Re p.; I . S amardzic, Jo sip Ju raj Strossmayer Un iversity of Osijek Mechanical Engineering Faculty i n Slavonski Brod Croatia This work is focused on testing and evaluation of creep properties of P92 base material (BM) and w...

This paper presents the development of finite element software for creep deformation and damage analysis of weldment. The development and benchmark test of the software under plane stress, plane strain, axisymmetric, and 3 dimensional cases were reported in previous work [1]. This paper primarily consists of two parts: 1) the structure of the new FE software and the existing FE library applied ...

[1] We evaluate the effect of coseismic stress changes on the fault slip at midcrustal depth, assuming a velocity-strengthening brittle creep rheology. We show that this model can help reconcile the time evolution of afterslip, as measured from geodesy, with aftershocks decay. We propose an analytical expression for slip of the brittle creeping fault zone (BCFZ) that applies to any dynamic or s...

Abstract: Two ethylene-octene copolymers (EOC) with the same melt flow index (MFI = 3 g/10 min) but different octene contents, being 20 and 35 wt % (EOC-20 and EOC-35), were compared with regard to sensitivity to electron beam crosslinking. Dynamic mechanical analysis (DMA) revealed a large influence of the octene content on the storage modulus and the glass transition temperature (Tg) but a sm...

Permanent deformation is one of the distress that develops gradually as number load applications increases and appears longitudinal depressions in wheel paths small upheavals to sides. For this reason, numerous studies conducted on modification asphalt binder or mixture by various fibre. This paper presents evaluation creep modulus permanent modified with fibres. In order envisage mixture, Fort...

S U M M A R Y We use idealized subduction megathrust models to examine aseismic, frictional fault creep throughout the interseismic period. We consider rate-dependent and rateand state-dependent friction. When there is significant post-seismic creep surrounding locations of coseismic slip, the creep rates surrounding an asperity may be lower than the plate convergence rate late in the seismic c...

In the present paper, time dependent creep behavior of hollow circular rotating cylinders made of exponentially graded material (EGM) is investigated. Loading is composed of an internal pressure, a distributed temperature field due to steady state heat conduction with convective boundary condition and a centrifugal body force. All the material properties are assumed to be exponentially graded a...

OBJECTIVES There have been several reports of upward creep in vancomycin MICs for Staphylococcus aureus [predominantly methicillin-resistant S. aureus (MRSA)] over recent years, but only in single centres or using contemporaneous results. We aimed to test the hypothesis of MIC creep in a multicentre study, testing all the isolates concurrently. METHODS Nineteen laboratories in the UK and Irel...