Nomenclature A new representation of engineering analysis models, termed product model-based analytical models (PBAMs) was introduced previously [Peak and Fulton, 1992b]. Since PBAMs link analysis information with detailed design information, they enable rapid, flexible analysis in support of product design. Nf average cycles to failure ∆ε p plastic cyclic strain range c fatigue ductility expon...

A major drawback in using bulk metallic glasses (BMGs) as structural materials is their extremely poor fatigue performance. One way to alleviate this problem is through the composite route, in which second phases are introduced into the glass to arrest crack growth. In this paper, the fatigue crack growth behavior of in situ reinforced BMGs with crystalline dendrites, which are tailored to impa...

Recent studies have shown that nanotwinned copper (NT Cu) exhibits a combination of high strength and moderate ductility. However, most engineering and structural applications would also require materials to have superior fracture toughness and prolonged subcritical fatigue crack growth life. The current study investigates the effect of twin density on the crack initiation toughness and stable ...

It has been possible in recent times to make large quantities of steels in which the controlling scale is 20 nm or less, i.e., comparable to that of carbon nanotubes. The mechanical properties of such steels are abnormal. For example, in some cases the ductility vanishes as the strength increases, whereas in others the ductility almost entirely consists of uniform plastic strain. Some of the st...

High temperature tensile tests have been conducted on samples of a Fe-Ni based superalloy, Incoloy A-286, and significant ductility loss has been observed at 1220 °C. Titanium-rich, thin-film-like phase has been found on the inter-granular facets of fracture surfaces. It appears that sulfur content of Ti-rich phase was higher than that of the matrix. At 1220 °C, liquation of Ti-rich phases has ...

Abstract. The mechanical and damage behavior of a X100 steel after prestrain is studied in this work. Experimental results show both a plastic and rupture anisotropy: the T direction exhibits a higher ultimate stress but the lowest ductility and toughness. Prestrain reduces ductility and crack growth resistance. A model able to represent the plastic and damage behaviour of the material before a...

Nanostructured bainite was obtained in high-carbon Si-Al-rich steel by low-temperature (220-260 °C) isothermal transformation after austenitisation at different temperatures (900 °C, 1000 °C, and 1150 °C). Improved strength-ductility-toughness balance was achieved in the nanostructured bainitic steel austenitised at low temperatures (900 °C and 1000 °C). Increasing the austenitising temperature...

Nanotwinned metals exhibit an unusual combination of ultrahigh strength, considerable ductility and enhanced rate sensitivity. We find that a Hall–Petch-type relationship closely fits the experiment data of activation volume as a function of twin spacing. The results suggest a transition of the rate-controlling mechanism from intra-twinto twin-boundary-mediated processes with decreasing twin la...

The ductility and plastic flow behavior of highly aligned nanotwinned copper produced by interrupted magnetron sputtering is investigated. Tensile tests were performed at various strain rates at both room and liquid nitrogen (77 K) temperatures. Higher ductility and strength are reported for all samples tested at 77 K. The observed inhomogeneous deformation and shear band propagation are discus...

A proper composition of stiffness and ductility parameters is required to obtain a resistant and economic structure. Accordingly, Chevron Knee Braced Frame (CKBF) seems appropriate due to its proper seismic performance. The advantage of this system comes to having the capability of rapid and cheap replacement of chevron knee elements after an earthquake occurs. In this research, response modifi...