In this study, the cyclic behaviors of low rise concrete shear walls using recycled coarse or fine aggregates were investigated. Eight low rise Recycled Aggregates Concrete (RAC) shear wall specimens were designed and tested under a cyclic loading. The following parameters were varied: replacement percentages of recycled coarse or fine aggregates, reinforcement ratio, axial force ratio and X-sh...

The Zr-based bulk metallic glasses (BMGs) are a new family of attractive materials with good glass-forming ability and excellent mechanical properties, such as high strength and good wear resistance, which make them candidates for structural and biomedical materials. Although the mechanical behavior of BMGs has been widely investigated, their deformation mechanisms are still poorly understood. ...

We have developed a mechanism-based plasticity model of nanotwinned metals to investigate the effect of twin spacing on strength, ductility and work hardening rate of such materials. In particular, the unique roles of dislocation pile-up zones near twin and grain boundaries, as well as twinning partial dislocations, in strengthening and work hardening are incorporated in the model. Competition ...

A family of interatomic potentials is constructed for which the intrinsic ductility can be tuned systematically. Specifically, the elastic constants and critical energy release rate for Griffith cleavage, GIc, are held constant, while the critical energy release rate for dislocation emission, GIe, can be varied. This behavior is achieved by modifying a standard near-neighbor pair potential; the...

A medium Mn steel has been designed to achieve an excellent combination of strength and ductility based on the TRIP (Transformation Induced Plasticity) concept for automotive applications. Following six passes of hot rolling at 850 °C, the Fe-7.9Mn-0.14Si-0.05Al-0.07C (wt.%) steel was warm-rolled at 630 °C for seven passes and subsequently air cooled to room temperature. The sample was subseque...

Magnesium alloys have recently attracted great interest due their lightweight and high specific strength. However, because of their hexagonal close-packed structure, they have few active slip systems, resulting in poor ductility and high mechanical anisotropy at room temperature. In the present work, we used a cross-shear deformation imposed by a differential speed rolling (DSR) technique to im...

Three different aluminum–iron alloys were produced by electron-beam deposition with the iron content in the range 1.15–1.71 at.%. These alloys did not contain any identifiable iron-bearing particles, and exhibited full density with high-angle grain boundaries in the micrometer range, and a sub-grain size typically smaller than 100 nm. The tensile deformation characteristics of the alloys were e...

Since the earthquakes in Northridge and Kobe in 1994 and 1995, respectively, many investigations have been carried out towards improving the strength and ductility of steel beam to column pre- and post-Northridge connections. In order to achieve these objectives, recent researches are mainly focused on three principles: reducing the beam section to improve the beam ductility, adding different k...

Chitosan is an important biomaterial used widely in medical applications. One of the key concerns about its use is the fragile nature of chitosan films. By comparing the component molecular interactions using FTIR, this study attempts to understand how the ductility of chitosan can be improved by blending and copolymerizing with poly(ethylene glycol) (PEG). An improvement in ductility was obtai...

We present a comprehensive computational analysis of the deformation of ultrafine crystalline pure Cu with nanoscale growth twins. This physically motivated model benefits from our experimental studies of the effects of the density of coherent nanotwins on the plastic deformation characteristics of Cu, and from post-deformation transmission electron microscopy investigations of dislocation stru...