this paper presents a control strategy for fuel cell/energy storage power generation system during voltage sag conditions. the hybrid dc power sources are connected to grid using power electronic converters include dc-dc converter and grid connected voltage source inverter. the power from hybrid power sources is controlled during voltage sag by designing of control strategy for dc-dc converter....

concurrent renewable energy production and wastewater treatment are two main reasons for using microbial fuel cells (mfcs). in this study, real wastewater was used for treating and power generation by air cathode microbial desalination cells (acmfc). the total duration of voltage generation by acmfc was about 151.9 ±23.2 h. the maximum voltage produced from municipal wastewater treatment was 27...

in this work, ce0.75gd0.1ca0.15o1.8 nanopowders are successfully synthesized by a glycine-nitrate combustionprocess under the microwave irradiation. then calcination was carried out at 700 °c. calcined powdersidentified by room temperature x-ray diffraction were single phase and had a crystallite size between 16 to 24nm (based on schererr formula). scanning electron microscopy (sem) was employe...

In this study, a more accurate model of fuel cell of molten carbonate was also used that was determined input and output control variables and investigated the behavior of the system with respect to those variables. A more complete kinetic is also implemented for increasing the effectiveness of the presented paper. The input variables include fuel flow rate of cell which is methane and cell vol...

For the last decade, dimethyl ether (DME) has been considered a promising alternative fuel for direct fuel cells because of several advantages over methanol. In this work, PtRu catalysts with a wide range of Pt-to-Ru ratios were screened for the direct DME fuel cell (DDMEFC) performance for the first time. Overall, Pt50Ru50 performs best in the high and middle voltage ranges, whereas Pt80Ru20 p...

A self-supported direct borohydride-hydrogen peroxide fuel cell system with internal manifolds and an auxiliary control unit is reported. The system, while operating under ambient conditions, delivers a peak power of 40 W with about 2 W to run the auxiliary control unit. A critical cause and effect analysis, on the data for single cells and stack, suggests the optimum concentrations of fuel and...

The performance of direct methanol fuel cell (DMFC) is closely related to its operating conditions, and there exists a specific combination of operating conditions at which the DMFC output maximum power to the driven load. Working at maximum power point (MPP) can lower the methanol crossover and ancillary power consumption so as to improve the global efficiency of the system. The fuzzy controll...

Analytical models provide useful information for researchers to study fuel cell function. In this paper, it’s aimed to present a 2D analytical model for direct ethanol fuel cell (DEFC) performance. The model included equations inside diffusion layer, catalyst layer, and Ethanol cross-over through membrane, which all have been solved. Analytical model has been validated by some experimental tria...