iii Abstract: High manganese TWIP (TWinning Induced Plasticity) steels are particularly attractive for automotive applications because of their exceptional properties of strength combined with an excellent ductility. However, as austenitic steels, they appear to be sensitive to liquid zinc embrittlement during welding, the liquid zinc arising from the melted coating due to the high temperatures...

Current article describes application of zeolites in fluid catalytic cracking (FCC). The use of several zeolitic additives for the production light olefins and reduction of pollutants is described. Application of zeolites as fluid catalytic cracking (FCC) catalysts and additives due to the presence of active acid sites in the zeolite framework  increase the formation of desired cracking product...

continued on page 4 Design group revamps postal manual Perhaps you’ve received it. If you have an Andrew account, there’s a one in three chance you did. ‘It’ is an e-mail with the subject, “Andrew account password insecure!” that claims your password has been cracked. The message goes on to say that in addition to the risks they pose to personal account security, slipshod passwords are a potent...

A key question which needs to be addressed and answered with regard to successfully implementing structural health monitoring technologies involves the long-term operability, durability, and survivability of integrated sensor systems and their associated hardware. This is particularly true for structural health monitoring in aerospace systems, where integrated sensors are expected to perform an...

The influence of cement fineness on early-age properties of cement-based materials is investigated using a variety of experimental techniques. Properties that are critical to the earlyage performance of these materials are tested, including heat release, temperature rise, chemical shrinkage and autogenous deformation. Measurements of these properties for two cements of widely different fineness...

Designs of composite laminates are investigated for hydrogen tanks in cryogenic environments. Large residual strains, which can develop due to thermal mismatch between matrix and Ž bers, result in matrix cracking at cryogenic temperatures and increase hydrogen leakage through the tank wall. To reduce thermal mismatch, ply angles need to be close to each other, but this leads to a substantial we...

thermal cracking of a heavy liquid hydrocarbon was performed in a laboratory scale tubular reactor. central composite design (ccd), was used as an experimental design method. the design variables were coil outlet temperature (cot), feed flow and rate steam ratio. maximum yield of ethylene was 30.37 wt% at cot, residence time and steam ratio of 869oc, 0.208 s and 1.22 g/g, respectively. maximum ...

No previous experience of eliminating reflective cracking of both joints and cracks in portland cement concrete pavements through bituminous concrete overlays has been completely successful. This led to the idea of breaking slabs into smaller pieces in order to control movement of the deteriorating PCC pavements under the overlays. In cracking and seating, the existing pavement is broken up int...

A concept of "Fractal Fracture Mechanics" for HDR .(Hot Dry Rock) geothermal reservoir design has been developed as an extension of conventional rock fracture mechanics. It is suggested that this concept is successfully applicable to characterize and model subsurface fracture network in HDR geothermal reservoir. Furthermore, this modeling procedure makes it possible to evaluate the thermal ener...