The effect of an inert solid deposit on uniform CO2 corrosion of mild steel is modeled based on a mechanistic electrochemical CO2 corrosion model. Laboratory testing has shown that the dominant factors introduced by the inert solids deposit are related to surface coverage, where both anodic and cathodic reaction rates are decreased because of less active surface area being exposed. The inert so...

In this work, Slow Strain Rate Test (SSRT) testing, Light Optical Microscopy (LOM) and Scanning Electron Microscopy (SEM) were used to study the effect of microstructure, corrosive environments and cathodic polarisation on stress corrosion cracking (SCC) of two grades of high strength steels, Type A and Type B. Type A is manufactured by quench and tempered (Q&T) method. Type B, a normalize stee...

The aim of this study was to demonstrate the relationship between the structural and corrosion properties of an ISO 5832-9 biomedical alloy modified with titanium dioxide (TiO2) layers. These layers were obtained via the sol-gel method by acid-catalyzed hydrolysis of titanium isopropoxide in isopropanol solution. To obtain TiO2 layers with different structural properties, the coated samples wer...

Corrosion can be affected by flow differently depending on the mechanism governing the corrosion process. Two major cases can be distinguished: the effect of flow on corrosion when no surface films are present and the effect of flow on corrosion in the presence of surface films (precipitates, inhibitors, etc.). In the absence of films, the primary effect of flow on corrosion is through mass tra...

The present work is a study of the corrosion susceptibility of steel drums in contact with cemented ion-exchange resins contaminated with different types and concentrations of aggressive species. A special type of specimen was manufactured to simulate the cemented ion-exchange resins in the drum. The evolution of the corrosion potential and the corrosion rate of the steel, as well as the electr...

The effects of environmental media on the corrosion fatigue fracture behavior of 25CrMo steel were investigated. The media include air, and a 3.5 wt.% and a 5.0 wt.% NaCl solutions. Experimental results indicate that the media induces the initiation of corrosion fatigue cracks at multiple sites. The multi-cracking sites cause the changes in the crack growth directions, the crack growth rate dur...

A mechanistic model of uniform carbon dioxide (CO2) corrosion is presented that covers the following: electrochemical reactions at the steel surface, diffusion of species between the metal surface and the bulk including diffusion through porous surface films, migration due to establishment of potential gradients, and homogenous chemical reactions including precipitation of surface films. The mo...

Stress corrosion cracking (SCC) behavior of Ni-free duplex stainless steels containing N and C (Febalance-19Cr-8Mn-0.25C-(0.03, 0.21)N, in wt %) was investigated by using a slow strain rate test (SSRT) in air and aqueous NaCl solution with different tensile directions, including parallel (longitudinal) and perpendicular (transverse) to the rolling direction. It was found that alloying N was eff...

We report on an optical microscopy technique for the analysis of corrosion kinetics of metal thin films in microreactor systems and use it to study the role of cetyltrimethylammonium bromide surfactant as a corrosion inhibitor in a copper-gold galvanic coplanar microsystem. A minimum in the dissolution rate of copper is observed when the surfactant concentration is approximately 0.8 mM. To expl...

The present paper describes fuzzy logic simulation of an experimental study on the behavior of hot corrosion in molten salt (Na2SO4) of steel-T21 coated by simultaneous yttrium-doped aluminizing-siliconizingprocess . Diffusion coating was carried out at 1050C for 6 hr under Aratmosphere . The weight change measurements made on the coated steel during the cyclic tests are used to determine kinet...