The fretting performance of self-piercing riveting joining dissimilar sheets in TA1 titanium alloy and H62 copper alloy was studied in this paper. Load-controlled cyclic fatigue tests were carried out using a sine waveform and in tension-tension mode. Scanning electron microscopy and energy-dispersive X-ray techniques were employed to analyze the fretting failure mechanisms of the joints. The e...

A multiphase nanostructured ZrCu-base bulk alloy which showed a unique microstructure consisting of sub-micrometer scale Zr₂Cu solid solution, nano-sized twinned plate-like ZrCu martensite (ZrCu (M)), and retained ZrCu (B2) austenite was fabricated by copper mold casting. The observation of periodic morphology evolution on the fracture surface of the multiphase nanostructured ZrCu-base alloys h...

The glass-forming ability (GFA), thermal stability and mechanical properties of bulk glassy Pd79Cu6 xAuxSi10P5 (x 1⁄4 0{6 at%) alloys were studied. The results revealed that the minor substitution of Au for Cu strongly affects the thermal stability and GFA of Pd–Cu–Au–Si–P alloys. The alloy in which 2 at% Au was added to substitute Cu (Pd79Cu4Au2Si10P5) exhibits the broadest supercooled liquid ...

Annealing of dilute binary Cu(Ti), Cu(In), Cu(Al), Cu(Sn), Cu(Mg), Cu(Nb), Cu(B), Cu(Co) and Cu(Ag) alloy films resulted in the strongest <111> fiber texture for Cu(Ti) and the lowest resistivity for Cu(Ag). The behavior of the alloy films was compared and contrasted with that for a pure evaporated Cu film. Electron beam evaporated films with compositions in the range of 2.0-4.2 at% and thickne...

A simple, sensitive and interference-free method was proposed for the determination of arsenic, based on the generation of volatile arsenic trichloride coupled with atomic fluorescence spectrometry. Thiourea, together with l-ascorbic acid, was used to reduce As(V) to As(III), and the chloride generation was based on the reaction between As(III) and hydrochloric acid. Under the optimized experim...

Methanol steam reforming is a promising reaction in terms of hydrogen production for use in PEM fuel cells. Catalyst research has focused mainly on Cu/ZnO formulations, because of their superior selectivity to CO2 and H2. The common byproduct CO is problematic due to its poisoning effect on the anode of a downstream fuel cell. Some years ago it was shown that palladium supported on certain redu...

Recently, titanium-tantalum alloys have been studied as implant materials for dental and orthopedic surgery. However, titanium and tantalum are difficult to mix by common arc melting and induction melting, because of their high melting point and the marked difference between their densities (Ti: 1,680 degrees C, 4.5 g/cm3, Ta: 2,990 degrees C, 16.6 g/cm3). Thus, the Cold Crucible Levitation Mel...

The toroidal field coil system of the FIRE tokamak utilizes LN2 cooled, copper alloy Bitter plate type magnets. The wedged configuration is baseline structural concept for the project. A beryllium copper alloy has been chosen for the conductor. Reported are some of the refinements in the design and analysis of FIRE based on a re-sizing of the machine to 2.14m The larger machine offers greater s...

A systematic approach to computer-aidedmaterials design has formulated a new class of ultratough, weldable secondary hardened plate steels combining new levels of strength and toughness while meeting processability requirements. A theoretical design concept integrated the mechanism of precipitated nickel-stabilized dispersed austenite for transformation toughening in an alloy strengthened by co...

In the present study, the microstructural evolution and the modulation of the mechanical properties have been investigated for a Co-Cr-Mo (CCM) ternary eutectic alloy by addition of a small amount of copper (0.5 and 1 at.%). The microstructural observations reveal a distinct dissimilarity in the eutectic structure such as a broken lamellar structure and a well-aligned lamellar structure and an ...