This study investigated the effects of four operational and environmental variables on the removal of trace metal contaminants from drinking water by electrocoagulation (EC). Removal efficiencies for five metals (arsenic, cadmium, chromium, lead and nickel) were compared under varying combinations of electrode material, post-treatment, water composition and pH. Iron electrodes out-performed alu...

The performance of a laboratory-scale 40 L anaerobic membrane bioreactor (AnMBR) treating municipal wastewater with and without iron supplementation was evaluated at ambient temperatures hydraulic retention time (HRT) 6 h sludge (SRT) 50 days. system exhibited satisfactory during the summer winter periods average COD removal efficiencies 73 ± 4% 60 4%, respectively. Moreover, two different FeCl...

Trace organic contaminants have become an increasing cause of concern for governments and water authorities as they attempt to respond to the potential challenges posed by climate change by implementing sustainable water cycle management practices. The augmentation of potable water supplies through indirect potable water reuse is one such method currently being employed. Given the uncertainty s...

Up to now, lots of materials such as active carbon, iron, manganese, zirconium, and metal oxides have been widely used for removal of dyes from contaminated water. Among these, ferrite nanoparticle is an interesting magnetic material due to its moderate saturation magnetization, excellent chemical stability and mechanical hardness. Graphene, a new class of 2D carbonaceous material with atom thi...

Batch sorption experiments using a starch-based sorbent were carried out for the removal of heavy metals present in industrial water discharges. The influence of contact time, mass of sorbent and pollutant load was investigated. Pollutant removal was dependent on the mass of sorbent and contact time, but independent of the contaminant load. The process was uniform, rapid and efficient. Sorption...

There is a need for the development of low-cost adsorbents to removal arsenic (As) from aqueous solutions. In this work, a magnetic biochar was synthesized by pyrolyzing a mixture of naturally-occurring hematite mineral and pinewood biomass. The resulting biochar composite was characterized with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) ...

This work describes the synthesis and testing of a novel environmental sorbent that combines the advantages of biochar, chitosan, and zerovalent iron (ZVI). Chitosan was used as a dispersing and soldering reagent to attach fine ZVI particles onto bamboo biochar surfaces. Characterization of the resulted ZVI-biochar composites (BBCF) indicated that chitosan effectively soldered the iron particle...

...............................................................................................3 Introduction............................................................................................3 Arsenic Maximum Contaminant Level.............................................................3 Arsenic Speciation...................................................................................

Nitrogen is a main contaminant of wastewater worldwide. Novel processes for nitrogen removal have been developed over the last several decades. One of these is the partial nitritation process. This process includes the oxidation of ammonium to nitrite without the generation of nitrate. The partial nitritation process has several advantages over traditional nitrification-denitrification processe...