Two designs of conical-beam array antennas are presented for different fifth-generation applications. They based on slotted cylindrical waveguides and a travelling-wave topology, where the waveguide is used to progressively excite cross-slot array. A total 384 cross-slots, formed by transversal longitudinal slots, grouped in rings eight equally-spaced cross-slots. The propagation TM <sub xmlns:...

A recent paper in this journal proposed the conversion of conical intersections to avoided crossings by lowering the symmetry with an optical field. The article also claimed that the characters of nonadiabatic transitions caused by avoided crossings and conical intersections are qualitatively different. The present comment shows that this proposal and this claim result from an incorrect appreci...

An active antenna for transmitter application in S frequency band is designed and analyzed using harmonic balance technique which is based on the nonlinear model of active devices. In this active antenna, the amplifier is integrated with the radiator which is a rectangular patch antenna. This patch antenna is analyzed employing full-wave momentum method. By applying nonlinear model of transisto...

A novel printed octagonal fractal microstrip antenna with semi-elliptical ground plane is presented for ultra wide band applications. The proposed antenna has a compact size of 20×20×1 mm³. The measured result of the antenna exhibits the ultra wide band characteristics from 2/9 to 14/2 GHz. In this paper, reducing antenna’s size by 35%, the same results were achieved, while small dimension frac...

PURPOSE Cone shape neck is regarded as non-instruction for use (IFU) in most commercial stent graft. However, in real practice, liberal application of endovascular aneurysm repair (EVAR) for outside of IFU happens. We investigate non-adherence to conical neck anatomy in terms of early aneurysmal exclusion results. MATERIALS AND METHODS From January 2010 to December 2013, 105 patients with abd...

A modified circular patch antenna design has been proposed in this paper, the bandwidth of this antenna is optimized using the genetic algorithm (GA) based on fuzzy decision-making. This design is simulated with HP HFSS Program that based on finite element method. This method is employed for analysis at the frequency band of 1.4 GHz- 2.6 GHz. It gives good impedance bandwidth of the order o...

In this article, we present a new design of a coplanar waveguide fed (CPW-fed) ultra-wideband (UWB) antenna with dual band-notched characteristics. Two notched frequency bands are achieved by using two inverted U-shaped stepped impedance resonators. The proposed antenna can operate from 2.82 to 11 GHz (118%), defined by VSWR< 2, except two notched bands around 3.5 GHz (WiMAX) and 5.5 GHz (WLAN)...

Modal signals of transverse sensing of truncated conical shells with simply supported boundary condition at both ends are investigated. The embedded piezoelectric layer on the surface of conical shell is used as sensors and output voltages of them in considered modes are calculated. The Governing sensing signal displacement equations are derived based on the Kirchhoff theory, thin-shell assumpt...