Lightweight ceramic-metal combinations are one option for advanced vehicle and other structural applications. These structures can require the fabrication of large area arrays of ceramic tiles on a metallic backing. However, the process of fabricating a combination of lightweight ceramics and metals is complicated by the need to bond these very dissimilar materials together. For severe applicat...

BACKGROUND The rapid decline in use of conventional total hip replacement with a large femoral head size and a metal-on-metal bearing surface might lead to increased popularity of ceramic-on-ceramic bearings as another hard-on-hard alternative that allows implantation of a larger head. We sought to address comparative effectiveness of ceramic-on-ceramic and metal-on-HXLPE (highly cross-linked p...

BACKGROUND In dental clinics, dentition defects are commonly restored with conventional porcelain-fused-to-metal fixed bridges. However, Ni-Cr alloy ceramic fixed bridges are known to have several drawbacks such as marginal coloration of the neck, low casting precision and, most seriously, poor biocompatibility. These problems could be circumvented by using noble metal ceramic bridges; however,...

We consider the problem of genetic association testing of a binary trait in a sample that contains related individuals, where we adjust for relevant covariates and allow for missing data. We propose CERAMIC, an estimating equation approach that can be viewed as a hybrid of logistic regression and linear mixed-effects model (LMM) approaches. CERAMIC extends the recently proposed CARAT method to ...

Cold cathode fluorescent lamps (CCFLs) are commonly used as a backlight source for color liquid crystal displays (LCDs) used in notebook computers and portable electronic devices. These lamps require a high ac voltage for ignition and operation. The required ignition voltage is typically double the operating voltage and increases at cold temperatures. Figure 1 shows the operating voltage of lam...

AIM The aim of this study was to evaluate the effect of recasting base metal alloy on the metal-ceramic bond strength. MATERIALS AND METHODS A total of 60 test samples were prepared from new and recast nickel-chromium alloy and divided into six groups. In group A0, test samples were prepared from 100% new alloy. Groups A1, A2, A3, A4, and A5 were prepared from 50% new alloy and 50% casting re...

Zirconia (ZrO(2)) and barium sulfate (BaSO(4)) particles were introduced into a methyl methacrylate monomer (MMA) solution with polymethyl methacrylate (PMMA) beads during polymerization to develop the following novel bone cements: bone cements with unfunctionalized ZrO(2) micron particles, bone cements with unfunctionalized ZrO(2) nanoparticles, bone cements with ZrO(2) nanoparticles functiona...

The contribution of electrostatic interactions to the free energy of binding between model protein and a ceramic implant surface in the aqueous solvent, considered in the framework of the nonlocal electrostatic model, is calculated as a function of the implant low-frequency dielectric constant. We show that the existence of a dynamically ordered (low-dielectric) interfacial solvent layer at the...

OBJECTIVES The aim of this study was to evaluate the effect of mechanical cycling on the biaxial flexural strength of two densely sintered ceramic materials. METHODS Disc shaped zirconia (In-Ceram Zirconia) and high alumina (Procera AllCeram) ceramic specimens (diameter: 15 mm and thickness: 1.2 mm) were fabricated according to the manufacturers' instructions. The specimens from each ceramic ...

Appropriate preparation routes allow designing and improving the performances of ceramic-based functional composites. In this work, two powder-preparation methods enabled by cold sintering process are utilized to fabricate unique ZnO-based varistor The thermoplastic polymer, poly-ether-ether-ketone (PEEK), has been successfully integrated with ZnO form dense ZnO-PEEK With a dissolution method, ...