To assess the applicability of latex cell coatings as an 'off-the-shelf' biocatalyst, the effect of osmoprotectants, temperature, humidity and O₂ on preservation of H₂ production in Rhodopseudomonas palustris coatings was evaluated. Immediately following latex coating coalescence (24 h) and for up to 2 weeks of dry storage, rehydrated coatings containing different osmoprotectants displayed simi...

To solve the lack of wear resistance of titanium alloys for use in biological applications, various prepared coatings on titanium alloys are often used as wear-resistant materials. In this paper, TiC bioinert coatings were fabricated on Ti6Al4V by laser cladding using mixed TiC and ZrO₂ powders as the basic pre-placed materials. A certain amount of CeO₂ powder was also added to the pre-placed p...

TiO2 nano-particles were used in electroless plating bath to obtain Ni/P/nano-composite coatings. The coatings were heat treated at 200, 400, 600 and 700 oC and their chemical and physical properties were investigated and it was found that 400 oC was the optimum temperature for the heat treatment of the coatings. The micro-hardness test of coatings showed that t...

Clay content (fraction < 2 μm) is one of the most important soil properties. It controls soil hydraulic properties like wilting point, field capacity and saturated hydraulic conductivity, which in turn control the various fluxes of water in the unsaturated zone. In our study site, the Kairouan plain in central Tunisia, existing soil maps are neither exhaustive nor sufficiently precise for water...

Nanocomposite Nb-C coatings, with a C/Nb ratio of 0.93 1.59, have been deposited by reactive sputtering in a commercial sputtering system where the C is supplied from an acetylene gas at deposition rates of up to 200 nm/min. The coatings are compared to nonreactively sputtered Nb-C coatings deposited from Nb and C targets in lab-scale equipment at deposition rates two orders of magnitude lower....

The objective of this study was to characterize the physicochemical, dissolution, and osteogenic properties of radio frequency magnetron sputtered dicalcium pyrophosphate/tricalciumphosphate (Pyro/TCP) and hydroxylapatite (HA) coatings. Therefore Pyro/TCP and HA coatings were deposited on grit-blasted titanium discs. The results showed that the deposited coatings were amorphous and changed into...

Nontronites are the ferric members of dioctahedral smectites, most of which are structural counterparts of beidellite (Brindley, 1980). The existence of a cont inuous b e i d e l l i t e n o n t r o n i t e series was suggested on the basis of chemical analyses by Ross & Hendricks (1945). However, a nontronite with montmorillonitic structure has been described by KSster (1982). Minor amounts of...

The clay and non-clay minerals have been identified by XRD analysis. The non-clay minerals include quartz, crystobalite, orthoclase, microcline, plagioclase, calcite, siderite and dolomite, and the clay minerals include kaolinite (52.39%), illite (36.39%) and illite-smectite mixed layer minerals (11.21%). Kaolinite is the most dominant component in the clay mineral assemblages. The clay mineral...

High density polyethylene (HDPE)/bamboo composites with different nanoclay and maleated polyethylene (MAPE) contents were fabricated by melt compounding. The compounding characteristics, clay dispersion, HDPE crystallization, and mechanical properties of the composites were studied. The equilibrium torque during compounding decreased with use of clay masterbatch and increased with the addition ...

Column experiments were conducted to study chemical factors that influence the release of clay (kaolinite and quartz minerals) from saturated Ottawa sand of different sizes (710,360, and 240 microm). A relatively minor enhancement of clay release occurred when the pH was increased (5.8 to 10) or the ionic strength (IS) was decreased to deionized (DI) water. In contrast, clay release was dramati...