Introduction: The aim of the present study was to evaluate the effect of glass ceramic insert in the sandwich technique to reduce microleakage in class II composite resin restorations. Methods: Sixty sound human upper second premolars were selected and randomly divided into six groups (n=10). Class II boxonly cavities were prepared in distal aspects of each tooth with gingival margin located ap...

Double-crucible cane fabrication of highly purified chalcogenide-glass was combined with multimaterial thermal fiber drawing to produce robust low-loss 0.2 NA chalcogenide fibers. Optical transmission losses were shown to be less than 1.1 dB/m at wavelengths of 1.5, 2.0 and 4.6 μm. Fiber transmission > 97% at the 1.5 μm design wavelength was demonstrated using single-layer anti-reflection coati...

The potential of the tailings from Morille scheelite-bearing calc-silicate deposit as a commercial raw material for inert glass–ceramic was determined. Nucleation and crystal growth temperatures glass were studied. maximum nucleation rate parent are 612 °C 660 is at 776 1047 °C. At nepheline, wollastonite akermanite formed. In glasses treated higher temperature nepheline becomes unstable wollas...

We report on buried planar waveguides in a highly nonlinear infrared transmitting chalcogenide glass, fabricated using a combination of inverted deposition of the molten glass phase and high-velocity spinning. Films of gallium lanthanum sulphide sGa:La:Sd glass were deposited onto an expansion coefficient matched Ga:La:S cladding substrate. These amorphous films, with an optimized composition d...

Ternary chalcogenide glass films from identical parent bulk glasses were prepared by thermal evaporation (TE) and pulsed laser deposition (PLD) and subjected to 810-nm femtosecond laser exposure at both kHz and MHz repetition rates. The exposure-induced modification on the glass film's surface profile, refractive index, and structural properties were shown to be a function of laser irradiance, ...

This paper will report on research which aims to generate bone replacement components by processing bioactive glass-ceramic powders using indirect selective laser sintering. The indirect SLS route has been chosen as it offers the ability to tailor the shape of the implant to the implantation site, and two bioactive glass ceramic materials have been processed through this route: apatite-mullite ...

The use of CAD/CAM technology has allowed the fabrication of ceramic restorations efficiently and with predictable results. Lithium disilicate is a type of glass ceramic material that can be used for the elaboration of laminate veneers, being monolithic restorations which require characterization through a covering ceramic in order to achieve acceptable esthetic results. The next case report sh...