High velocity oxygen fuel thermal spray has been widely used to deposit hard composite materials such as WC-Co powders for wear-resistant applications. Unlike gas atomized spherical powders, WC-CO powders form a more complex geometry. The knowledge gained from the existing spherical powders on process control and optimization may not be directly applicable to WC-Co coatings. This paper is the f...

The aim of this study was to evaluate the in vitro color agreement between nanofluorapatite ceramic discs (e.max Ceram / Ivoclar Vivadent / A2) associated with try-in pastes and those bonded with resin cements (Vitique / DMG/ try-in shade A2½ and cement shade A2½, Variolink II / Ivoclar Vivadent / try-in shade A1 and cement shade A1, and Choice 2 / Bisco / try-in shade A2 and cement shade A2), ...

Introduction: The rehabilitation of teeth by means of ceramic indirect restorations has been widely performed. Previous studies has shown the effectiveness of silane coupling agents on improving the bond strength of the adhesion of resin cements to ceramics; however, some studies question the use of silane. Objective: To evaluate the effect of silane application on the microtensile bond strengt...

The aim of this study was to determine the effectiveness of bonding brackets to ceramic restorations. Sixty feldspathic and 60 lithium disilicate ceramic specimens were randomly divided into six groups. Shear bond strength (SBS) and bond failure types were examined with six surface-conditioning methods: silane application to glazed surface, air particle abrasion (APA) with 25- and 50-microm alu...

In one form of powder methods, the powder is compressed in a die and subsequently sintered. The final dimensions are determined by the powder, die, compaction pressure, and sintering densification cycle. The higher the compaction pressure, the higher the final density and properties. Minimal densification occurs in sintering if the powders are large and the sintering temperature is low. This is...

The heating of porous dielectrics, beef–air (b/a) and beef–oil (b/o), attached with ceramic, metallic or ceramic–metallic composite supports, has been studied analytically using microwaves. Three test porosities were considered, 0.3, 0.45 and 0.6. A preliminary understanding of enhanced heating and power absorption within the material was obtained from the average power vs slab depth plots. The...