We present new laboratory observations of an advancing boiling front radiating from an injection point in a simulated geothermal reservoir. The Berea sandstone model is a 26 cm cube that is either heated to a dry 125°C, or saturated with 145°C steam in two separate testing configurations. Cool water is applied at the sample center, and the advancing boiling front is identified by a radial array...

The objective of this research was to determine the variation of milk stability evaluated with ethanol, boiling, and coagulation time tests (CTT) to identify milk components related with stability and verify the correlation between the three methods. Bulk raw milk was collected monthly at 50 dairy farms from January 2007 to October 2009 and physicochemical attributes, somatic cell (SCC), and to...

This paper is the second of a two-part study concerning two-phase flow and heat transfer characteristics of R134a in a micro-channel heat sink incorporated as an evaporator in a refrigeration cycle. Boiling heat transfer coefficients were measured by controlling heat flux (q00 = 15.9 93.8W/cm) and vapor quality (xe = 0.26 0.87) over a broad range of mass velocity. While prior studies point to e...

Previous studies have revealed it is possible to separate a high-boiling mixture by gas chromatography in empty fused-silica capillary tubing rather than in columns coated with stationary phase. Chromatographic separation occurs solely on the basis of the different boiling points of the substances separated. The high similarity of such separations to those in classic distillation seems advantag...

Description colorless or yellow liquid Molecular formula HNO3 Molecular weight 63.02 Density 1.50269 g/cm @ 25°C Boiling point 83° C with decomposition Melting point -41.59°C Vapor pressure 62 mm Hg @ 25°C Flashpoint not applicable Explosive limits not applicable Solubility miscible in water Odor threshold 0.27 ppm (AIHA, 1989) Odor description choking odor Metabolites oxides of nitrogen, parti...

The design and reliable operation of a two-phase micro-channel heat sink require a fundamental understanding of the complex transport phenomena associated with convective boiling in small, parallel coolant passages. This understanding is the primary goal of this paper. This goal is realized by exploring the following aspects of boiling in microchannels: hydrodynamic instability, two-phase flow ...

Experiments were performed with FC-77 using three full-cone spray nozzles to assess the influence of subcooling on spray performance and critical heat flux (CHF) from a 1.0 1.0 cm test surface. The relatively high boiling point of FC-77 (97 C at one atmosphere) enabled testing at relatively high levels of subcooling. Increasing the subcooling delayed the onset of boiling but decreased the slope...

This two-part study concerns the development of a generalized approach to predicting both Nucleate Boiling dominated and Convective Boiling dominated heat transfer in mini/micro-channel flows. Both heat transfer regimes exhibit substantial reduction in the heat transfer coefficient at the location of partial annular liquid film dryout, hence the need to ascertain the occurrence of this importan...