objective: reinforcement with fiber is an effective method for considerable improvement in flexural properties of indirect composite resin restorations. the aim of this in-vitro study was to compare the transverse strength of composite resin bars reinforced with preimpregnated and non-impregnated fibers. materials and methods: thirty six bar type composite resin specimens (3×2×25 mm) were const...

This study proposes boron nitride nanotube (BNNT) reinforced hydroxyapatite (HA) as a novel composite material for orthopedic implant applications. The spark plasma sintered (SPS) composite structure shows higher density compared to HA. Minimal lattice mismatch between HA and BNNT leads to coherent bonding and strong interface. HA-4 wt% BNNT composite offers excellent mechanical properties-120%...

In this work the fracture toughness of epoxy resin has been improved through the addition of low loading of single part and hybrid nanofiller materials. Functionalised multi-walled carbon nanotubes (f-MWCNTs) was used as single filler, increased the critical strain energy release rate, GIC, by 57% compared to the neat epoxy, at only 0.1 wt% filler content. Importantly, no degradation in the ten...

Brittleness, which was the inherent weakness in High Strength Concrete (HSC), can be avoided by reinforcing the concrete with discontinuous fibers. Reinforcing HSC with more than one fiber is advantageous in an overall improvement of the mechanical performance of the composite. In this experimental study, Hybrid Fiber Reinforced High Strength Concrete (HyFR-HSC) mixes were formed by blending si...

This paper describes the effects of reinforcement by randomly distributed nylon fibers and addition of nanoclay on some engineering properties of a typical asphalt concrete. The properties of asphalt concrete reinforced by different percentages of 25 mm nylon fibers have been compared with those of the mixtures containing different percentages of nanoclay and those in which both the fibers and ...

In this research, static stresses analysis of boron nitride nano - tube reinforced composite (BNNTRC) cylinder made of poly - vinylidene fluoride (PVDF) subjected to non - axisymmetric thermo - mechanical loads and applied voltage is developed. The surrounded elastic medium is modelled by Pasternak foundation. Composite structure is modeled based on piezoelectric fiber reinforced composite (PFR...

fibers of poplar wood (populus nigra l.) were prepared and oven dried. afterwards, they were acetylated with acetic anhydride without a catalyst. acetylation was carried out for different durations at 120ºc. different weight percentage gains (wpgs) were achieved based on the operating conditions. acetylated fibers were exposed to varying levels of relative humidity to determine equilibrium mois...

Microwave dyeing was carried out under a variety of conditions in terms of the power and time of a microwave to investigate the effects of microwaving on the dyeability of acrylic fibers. It was found that the dyeability of acrylic fibers were significantly improved under microwave irradiation caused by the increased adsorption of the dye into fibers due to the local over heating and an amplifi...