The valve mass flux Gv is the calculated value for an ideal (isentropic) nozzle Gn from an appropriate model, multiplied by a discharge coefficient Kd, which accounts for any discrepancies between the (ideal) nozzle model and flow in a real nozzle, as well as any differences between the flow in the nozzle and the actual valve: Gv = Kd Gn (2) As shown in Figure 1, there are obvious similarities ...

In this paper some discrete parts of an electrostatic and flat-walled self-aligned valveless, micropump for drug delivery system is designed and simulated. The core component of the system is a piezoelectric diaphragm that can convert the reciprocating movement of a diaphragm actuated by a piezoelectric actuator into a pumping effect. The deflection in the diaphragm was analyzed by applying the...

The main task of the engine 3D CFD simulation is to support combustion design development. New combustion concepts (e.g. Low Temperature Combustion, HCCI, multiple injection strategies ...) can be analyzed and predicted by detailed thermo-dynamical computation. To achieve this aim many simulation tools are needed: each of them should be capable of reproducing the sensitivities of combustion des...

The purpose of this study was to develop and evaluate the flow rate, spray pattern, and droplet spectra characteristics of an actively controlled variable-orifice nozzle at constant carrier pressures. A commercially available variable-orifice nozzle (VariTarget) was modified to allow for direct electromechanical control of the metering stem. The modified system was tested at five carrier pressu...

This study was designed to determine if the present USDAARS spray-nozzle models, which were based on spray solutions of water plus non-ionic surfactant, could be used to estimate spray droplet-size data for different spray formulations through use of experimentally determined correction factors. Twelve spray-solution treatments were evaluated, ten of which contained a formulated glyphosate prod...

An investigation is made into the effects of water jet pressure, nozzle diameter, traverse speed of the nozzle over the rock surface and the number of times the jet passes over the same area on the penetration of a water jet into Indiana limestone. The effectiveness of the cut is judged on the depth of cut established and the specific energy of rock removal. Pressure is varied in the range from...

Static electromagnetic braking (EMBr) fields affect greatly the turbulent flow pattern in steel continuous casting, which leads to potential benefits such as decreasing flow instability, surface defects, and inclusion entrapment if applied correctly. To gain a fundamental understanding of how EMBr affects transient turbulent flow, the current work applies large eddy simulations (LES) to investi...

Important nuclear maintenance tasks, such as the steam generator nozzle dam placement, could be most effectively done by robotic systems. However, restricted teleoperator visibility and lack of absolute accuracy make such tasks very difficult to perform using conventional robotic control technology. In this paper, successful nozzle dam placement is achieved through a 3-D virtual viewing system ...

The efficiency and emissions of internal combustion (IC) engines are closely tied to the formation of the combustible air-fuel mixture. Direct-injection engines have become more common due to their increased practical flexibility and efficiency, and sprays dominate mixture formation in these engines. Spray formation, or rather the transition from a cylindrical liquid jet to a field of isolated ...

In this study, a non-contact type intraocular pressure (IOP) measuring system using reflected pneumatic pressure is proposed to overcome the disadvantages of existing measurement systems. A ring-type nozzle, a key component in the proposed system, is designed via computational fluid analysis. It predicts the reflected pneumatic pressure based on the nozzle exit angle and inner and outer diamete...