Lead(II) ion is a very toxic element known to cause detrimental effects to human health even at very low concentrations. An adsorbent prepared using mucilaginous leaves from Diceriocaryum eriocarpum plant (DEP) was used for the adsorption of lead(II) ion from aqueous solution. Batch experiments were performed on simulated aqueous solutions under optimized conditions of adsorbent dosage, contact...

Hemoadsorption, or hemoperfusion (HP) was introduced by H. Yatzidis in early 1960s [1]. It is an extracorporeal technique that cleanses blood by passing it through an adsorbent column. Active carbon (AC) was the first choice due to its undisputable superiority as an adsorbent over other materials. Although the initial results were very successful, this procedure induced a series of complication...

The use of Azolla filiculoides (AF) for the removal of Acid Red 88 dye (AR88) from aqueous solutions at different contact times, temperatures, pH, adsorbent doses and initial dye concentration was investigated. The extent of dye removal decreased with increasing adsorbent dosage and AR88 concentration, also increased with increasing contact time and temperature. The adsorption isotherms are des...

In the present investigation, three different solid wastes namely almond green hull, eggplant hull, and moss were initially treated and used as adsorbents for the adsorption of strontium ion from aqueous solutions. Adsorbent types and chemical treatments are proved to have effective roles on the adsorption of Sr(II) ion. Among the three adsorbents, almond green hull demonstrated strong affinity...

Two SiO2 and three Al2O3 adsorbents with varying degrees of mesoporosity (pore diameter 2-50 nm) were reacted with 2,4-dichlorophenoxyacetic acid (2,4-D) at pH 6 to investigate the effects of intraparticle mesopores on adsorption/desorption. Anionic 2,4-D did not adsorb onto either SiO2 solid, presumably because of electrostatic repulsion, but it did adsorb onto positively charged Al2O3 adsorbe...

The efficacy of seashells as a new adsorbent for removal of phenol from aqueous solutions was studied by performing batch equilibrium tests under different operating parameters such as solution pH, adsorbent dose, initial phenol concentration, and temperature. The phenol removal efficiency remained unaffected when the initial pH of the phenol solution was in the range of 3–8. The amount of phen...

The removal of Pb(II) from aqueous solutions by using modified Amberlite XAD-7HP resin has been studied. The resins have been prepared by complete mixing of Amberlite XAD-7HP resin with anionic surfactant-dioctyl sodium sulphosuccinate (DOSSS) and EDTA-disodium salt (Chelating agent) in an aqueous solution. SEM studies revealed the morphological observations of the unloaded adsorbent and thereb...

The purpose of this study was to investigate the adsorption of uranium (VI) ions on the polypyrrole adsorbent. Polypyrrole was synthesized by a chemical method using polyethylene glycol, sodium dodecylbenzenesulfonate, and cetyltrimethylammonium bromide as the surfactant and iron (III) chloride as an oxidant in the aqueous solution. The effect of various surfactants on the synthesized polymers ...

Cucumissativus peel (CSP), was investigated as a new adsorbent for Pb(II) removal from aqueous solution under several varying conditions such as pH, adsorbent dosage, and contact time. Maximum metal sorption was found to occur at initial pH 5.0. The adsorption capacity of CSP was found to be 28.25mg/g for initial Pb(II) concentration of 25 mg/l at 25°C. The equilibrium data best fitted to the L...

Mesoporous MIL-101(Cr) is used as host for a ship-in-a-bottle type adsorbent for selective U(VI) recovery from aqueous environments. The acid-resistant cage-type MOF is built in-situ around N,N-Diisobutyl-2-(octylphenylphosphoryl)acetamide (CMPO), a sterically demanding ligand with high U(VI) affinity. This one-step procedure yields an adsorbent which is an ideal compromise between homogeneous ...