In this research work, impact strength of untreated, alkali treated, potassium permanganate treated, benzoyl chloride treated and acrylic acid treated areca fiber reinforced epoxy composites were studied under 40%, 50%, 60% and 70% fiber loadings. Impact strength increased with increase in fiber loading up to 60% and then showed a decline for all untreated and chemically treated areca fiber rei...

A typical epoxy formulation can absorb several weight percent of water, seriously degrading the physical properties of the resin. In two preceding publications (Soles, C. L.; Chang, F. T.; Bolan, B. A.; Hristov, H. A.; Gidley, D. W.; Yee, A. F. J Polym Sci Part B: Polym Phys 1998, 36, 3035; Soles, C. L.; Chang, F. T.; Gidley, D. W.; Yee, A. F. J Polym Sci Part B: Polym Phys 2000, 38, 776), the ...

BACKGROUND Epoxy products are among the most common causes of occupational allergic contact dermatitis. Diglycidyl ether of bisphenol A resin (DGEBA-R) is the most important sensitizer in epoxy systems. OBJECTIVES To describe patients with occupational allergic contact dermatitis caused by epoxy products. METHODS Patients with allergic reactions to epoxy chemicals were chosen from test file...

The UV-induced polymerization of multifunctional monomers has found a large number of applications in various industrial fields, mainly in the production of films, inks and coatings on a variety of substrate, including paper, metal and wood. This polymerization process has been used for fabrication of nanostructured epoxy coatings characterized by outstanding properties, pursuing two different ...

The addition of liquid-filled urea-formaldehyde (UF) microcapsules to an epoxy matrix leads to significant reduction in fatigue crack growth rate and corresponding increase in fatigue life. Mode-I fatigue crack propagation is measured using a tapered doublecantilever beam (TDCB) specimen for a range of microcapsule concentrations and sizes: 0, 5, 10, and 20% by weight and 50, 180, and 460 lm di...

in the present research work, the flexural modulus and strength of glass fiber-epoxy resin and carbon fiber-epoxy resin composites have been enhanced through fiber tension during curing of the polymeric resin. this study showed that the tension applied on the fibers increased the flexural modulus of the glass-epoxy composites up to 12% and the flexural strength up to 19%. the flexural modulus a...

Low cost composite materials are widely used in civil and structural engineering applications. This project uses Epon and chopped hemp to plasticize a commonly used resin, epoxy resin to lower the cost of the composite and to find out the mechanical and thermal properties of the plasticized epoxy resin to see if it is suitable for the said applications. Epon and chopped hemp were mixed together...

A method was developed for the preparation of microcapsules containing a reactive amine with potential applications in self-healing polymers. Amine core microcapsules were prepared by interfacial polymerization of an isocyanate and an amine stabilized by an inverse Pickering emulsion. Microcapsules were successfully isolated, dried, and redispersed in epoxy. Visualization of capsules in cured e...

NMR magnet coils are usually quite long, thick, and tightly wound with thin superconducting wires. The successful vacuum/pressure impregnation of such kind of coils demands the use of epoxy resins with superior properties such as low viscosity, long pot life, and high cracking resistance etc.. In order to find the most appropriate impregnating epoxy resin for the fabrication of high-field NMR m...

Epoxy/Single Walled Carbon Nanotube Nanocomposite Thin Films for Composites Reinforcement. (May 2009) Graham Leicester Warren, B.S., Texas A&M University Chair of Advisory Committee: Dr. Hung-Jue Sue This work is mainly focused upon the preparation, processing and evaluation of mechanical and material properties of epoxy/single walled carbon nanotube (SWCNT) nanocomposite thin films. B-staged e...