this paper deals with the investigation of the microstructure and hardness of steel samples cladded with satellite 6-wc composites by using gas tungsten arc welding (gtaw) process. for this purpose, steel samples were coated with unreinforced and reinforced stellite (by 20, 30 and 40 wt.% wc). the cladded samples were evaluated by metallographic studies, microhardness measurement and x-ray diff...

Interdigital and combline filters, constructed from commonly available metallic components, such as brass, aluminium, steel etc, invariably are affected by their thermal expansion and contraction. The effect is especially significant in very narrow band filters where the change in the resonant frequency of slabline and coaxial resonators can result in a significant unwanted shift in the pass or...

Cathodic activation examined with reference to the cold fuslon developments (controversy). Historically cathodic activation has been used for plating preparation of p a s s i v e (o x i d e) s u r f a c e s e.g. nickel/chromium alloys, niobium and powdered metals. More recent results of work employing cathodic activation for preparing aluminum for plating will be presented e.g. process paramete...

the application of conductive coatings on ferritic stainless steel can decrease electrical conductivity. theaim of this research was to investigate the electrical conductivity of cobalt coated aisi 430 ferritic stainlesssteel by pack cementation technique. coated coupons were analyzed using scanning electron microscopy(sem). electrical conductivity of the coated substrates was measured as a fun...

in order to enhance the performance of interconnects which are used in solid oxide fuel cells (sofcs), a protective/conductive coating can be applied. in this research aisi 430 ferritic stainless steel was coated in a mn-base pack mixture by pack cementation method. in order to evaluate the oxidation behavior, isothermal oxidation was accomplished for 200 h at 800 ºc. electrical behavior was al...

Mechanical properties response of extruded 6063 aluminum alloy at varied die entry angle has been investigated. Plain carbon and tool steel dies with entry angles of 15, 30, 45, 60, 75 and 90 were simulated. Extrusion on the alloy was done at ambient temperature (37C) and the extruded samples from the various angles were subjected to selected service related mechanical tests and microstructural...

A customer who places a tentative order at a steel mill customarily receives a due-date quotation, namely the date by which the mill says that it will ship the order. The steel mill wants the due date to be early enough so that the customer won’t balk (withdraw the order), but late enough so that the probability of tardiness is low. This note obtains expressions for the tardiness probability at...

ABSTRACT Aerosol size information is very important for risk estimation of radon exposure. Size measurements of aerosol particles attaching radon progeny were made by using the Dekati's ELPI (Electrical Low Pressure Impactor), and its attachment function was determined. The impactor, which covers a wide size range from 0.03 to 10 μm in diameter, gives number size distribution in real time by an...

in this study, mixed metal oxides al2o3/mgo/tio2 coatings with al/mg/ti ratio of 5:1:3 and 2.5:3:4 were coated on aluminum by sol-gel method. the surface morphology, phase analysis, thermal behavior and the corrosion behavior of the al2o3/mgo/tio2 coatings were characterized by (sem), (xrd), (tg-dta) and potentiodynamic polarization test in 3.5 wt.% nacl solution. the results demonstrated that ...

The authors of this experimental research work have made an attempt to experimentally investigate the ultimate flexural load of ferrocement slabs of size 700mm. X 200mm. X 15mm. (thickness) reinforced with PVC coated steel weld mesh, and compare the results with slabs using GI-coated steel weld mesh, by varying the number of layers from 1-3. Ordinary Portland Cement, locally available river san...