Five types of nanofillers, namely, silica, surface-silylated silica, alumina, surface-silylated alumina, and boron nitride, were tested in this study. Nanocomposites composed of an epoxy/amine resin and one of the five types of nanoparticles were tested as dielectrics with a focus on (i) the surface functionalization of the nanoparticles and (ii) the water absorption by the materials. The dispe...

Catechin belongs to a group of flavonoids, which are present in many fruits and plants. Catechin is often employed in model investigations on antioxidant behavior of flavonoids. Recently also some anti-disease properties of flavonoids were reported. In this paper investigations were carried out on alumina/(+ )-catechin solution system. FTIR spectra were taken for the catechin samples retaken fr...

The structure and surface composition of binary oxides consisting of CrO(x) and VO(x) dispersed on alumina and their effects on the rate and selectivity of oxidative dehydrogenation (ODH) of propane were examined and compared with those for CrO(x) and VO(x) dispersed on alumina. VO(x) deposition on an equivalent CrO(x) monolayer on alumina and deposition of CrO(x) on an equivalent monolayer of ...

This paper presents the findings of a study on adsorption of dichlorodiphenythreechloroethen (DDT) and polychlorinated biphenyls (PCBs) on three nanomaterials including Multi walled Carbon Nanotube (MWNT), nano-clay and nano-alumina. DDT and PCBs are of significant concern due their high toxicity and long environmental half-lives. Experiments were conducted using batch adsorption procedures at ...

In this work, we report low-loss single-mode integrated optical waveguides in the near ultra-violet and visible spectral regions with aluminum oxide (Al(2)O(3)) films using an atomic layer deposition (ALD) process. Alumina films were deposited on glass and fused silica substrates by the ALD process at substrate/chamber temperatures of 200 °C and 300 °C. Transmission spectra and waveguide measur...

Large 6 mm× 9 mm silicon chips have been successfully bonded to alumina substrates with electroplated Au/Sn/Au structure at the eutectic omposition. The new bonding process is entirely fluxless, or flux-free. It is performed in vacuum (50 milliTorrs), where the oxygen content is educed by a factor of 15,200 comparing to air, to inhibit solder oxidation. Eutectic Au80Sn20 alloy is a well establi...

Recovery of iron from iron-rich diasporic bauxite ore via reductive roasting followed by magnetic separation has been explored recently. However, the efficiency of alumina extraction in the non-magnetic materials is absent. In this paper, a further study on the digestion of alumina by the Bayer process from non-magnetic material obtained after magnetic separation of reduced iron-rich diasporic ...

A series of bulk oxides (Sb2O3, Sb2O4, VSbO4, and V2O5) and alumina-supported oxides (Sb-O, V-O, and Sb-V-O) were synthesized by conventional methods. The resulting catalysts were characterized with XRD, BET, Raman, and CH3OH-temperature programmed surface reaction (TPSR) spectroscopy. XRD and Raman spectroscopy confirmed that the bulk oxides are present as crystalline phases and the alumina-su...

Objective: The objective of the present study was to evaluate effect of roughness of the basal surface and increase in its surface area on retention of maxillary denture bases, and compare the retention of the denture bases after surface treatment with different sizes of alumina particles. Materials and Methods: Twenty healthy subjects with edentulous maxillary ridge and good oral hygiene were ...

Spark plasma sintering (SPS) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. Owing to the advantage of rapid heating, the alumina ceramics obtained by SPS have a grain size and density comparable to those of hot pressed ones. The increase of densification rate may be related to some difference in ion transport characteristics. This study...