Interfacial compatibility plays a key role in the performances of natural fiber-reinforced composites. The measures commonly used to improve the interfacial compatibility focus more on the addition of various compatibilizers than on the structural modification of the natural fiber. In this paper, an attempt was made to enlarge the interfacial interaction areas of the recycled polyethylene (rPE)...

Metal Matrix composites (MMCs) are light weight, high-strength materials with potential application in areas such as automobile, aerospace, defence and other industries. MMCs are projected to significantly reduce the overall weight of the vehicle and aircraft while maintaining satisfactory structural strength. Micron and Nano-sized ceramic particle reinforced aluminum matrix composites fabricat...

The preparation and photocatalysis of TiO2–ZnS/fluoropolymer fiber composites were investigated. The fluoropolymer nanofiber mats with carboxyl groups were prepared by electrospinning, and then titanium and zinc ions were introduced onto the fiber surfaces by the coordinating of carboxyl of fluoropolymer in solution. The TiO2–ZnS composites with diameters 15 nm to 1 lm were immobilized on the s...

Original graphene oxide (GO) nanosheets were prepared using the Hummers method and found to easily aggregate in aqueous and cement composites. Using carboxymethyl chitosan (CCS) as a dispersant, few-layered GO nanosheets (1-2 layers) were obtained by forming CCS/GO intercalation composites. The testing results indicated that the few-layered GO nanosheets could uniformly spread, both in aqueous ...

the aim of this work is to evaluate the influence of fabrication methods on the com-pressive properties of sandwich composites using both experimental work and numerical simulations. two types of sandwich composites with e-glass/kevlar/polyester resin facings and end-grain balsa wood as core have been produced by vacuum infusion processing (vip) and hand-lay up (hl) method. compression tests on...

in this study, the strain rate effect on the bending properties of fiber reinforced composites for three types of polymer composites namely phenolic resin reinforced by woven basalt fibers, woven carbon fibers, and woven basalt/ woven carbon fibers at a total volume fraction of approximately 35% has been determined. flexural tests have been conducted at low range of strain rates included 0.03 m...

Thermo-set based composites using epoxy resin systems currently dominate the composite industry. Glass-reinforced epoxy composites are extensively used in the structural composites of aircraft industry due to low shrinkage, ease of fabrication, chemical resistance, and higher mechanical and electrical properties. The above characteristics coupled with techno-economic considerations are mainly r...

The use of agriculture residues as filler in composites is increasing due to their strength, abundance and low cost. Soya stalks show promising renewable natural fiber. In polyethylene composites the physical and mechanical properties (flexural resistance, tensile, impacted absorbed energy, water uptake and thickness swelling) was examined at different composites. The results showed that, the m...

To develop more green polymer composites and further know the performance of green composites, the composites based on green poly(L-lactic acid) (PLLA) and starch were fabricated by a counter-rotating mixer. And effect of starch on the fluidity and nucleating performance of PLLA was investigated using melt index instrument, optical depolarizer and wide angle X-ray diffraction instrument, respec...