The present research describes the performance of NiO NPs/Ag-clinoptilolite composite adsorbent for the removal of uranium (U(VI)) ions from drinking water of Dezful city-Iran. Prior to the experiment reactions, Na-clinoptilolite was chemically treated with NaCl, Silver ions (Ag+) and subsequently Nickel (NiO) NPs to prepare NiO NPs/Ag-clinoptilolite. The samples were characterized by SEM, AAS,...

High surface area and highly mesoporous activated carbon fibers (ACF) were obtained by physical activation of natural precursors (vetiver roots and bagasse) with steam and chemical activation using phosphoric acid. The textural characteristics of the activated were determined by nitrogen adsorption study and mercury porosimetry and showed that interesting porosity were obtained (SBET up to 1600...

Removal of Methylene Blue (MB) and Crystal Violet (CV) dyes from monocomponent and binary aqueous solutions by water hyacinth-E. Crassipes roots fixed on alginate (a low-cost adsorbent) has been investigated. The extent of adsorption was evaluated as a function of solution pH, initial dye concentration, and bead biomass loading. Kinetic sorption data were analysed by widely used models: pseudo-...

One kind of adsorbent with a high adsorption capacity for anionic dyes was prepared using ionically and chemically cross-linked chitosan beads. A batch system was applied to study the adsorption behavior of one acid dye (MY, metanil yellow) and one reactive dye (RB15, reactive blue 15) in aqueous solutions by the cross-linked chitosan beads. The adsorption capacities was 3.56 mmol g(-1) (1334 m...

sorption reactions in many heterogeneous systems are important. adsorption is a time dependent process and knowing the adsorption rate is essential for designing, evaluating and recovering the adsorbents. at the present study, an ammonium adsorption kinetic experiment by some soils series of golestan provice, which is varying in mineralogical and textural properties was conducted using solution...

background: the efficacy of nh4cl-induced activated carbon (nac) was examined in order to adsorb rr198, an azo reactive model dye, from an aqueous solution. methods: the effects of ph (3 to 10), adsorbent dose (0.1 to 1.2 g/l), dye concentration and contact time on the adsorption efficiency were investigated. results: the results showed that the removal of dye was highest at a solution ph of 7 ...

background & aims of the study: dyes are one of the widespread chemicals which may have many adverse effects on life cycle. thus, this study was conducted to survey the rb19 dye removal efficacy from aqueous solution, using the sio2 nanoparticles. materials and methods: this study was an experimental-lab study. the batch adsorption system were utilized to evaluated the rb19 dye removal efficien...

In the present study, a hydrophobic zeolite was used as an adsorbent for the adsorption of polyethylene glycol (PEG) in water solution and electroplating solution at 25 degrees C. The adsorption capacities were determined through the adsorption isotherms in a thermostated shaker. The rate of adsorption, on the other hand, was investigated in a batch adsorber under controlled process parameters ...

The activated charcoal was used for the removal of alizarin red dye from aqueous solution. Different parameters such as effect of contact time, initial dye concentration and pH were investigated. It was observed from the concentration study that the amount of dye adsorbed per unit mass of the adsorbent increased with increase in dye concentration. The pH study presented that the adsorption of d...