Supercapacitor electrode slurry is prepared for mass production by mixing activated carbon powder, conductive agent, and binder, which then deposited on a substrate using the doctor-blade method. Polyvinylidene fluoride (PVDF) 1-methyl-2-pyrrolidone (NMP) are used as binder solvent, respectively, to form metal substrate. In this study, ethyl cellulose (EC) evaluated prepare an indium-tin-oxide ...

This study focused on the effect of powder activated carbon (PAC) adsorption on microfiltration (MF) membrane performance. The results showed that PAC pretreatment offered high organic matter removal rates for both dissolved organic carbon (DOC) and ultraviolet absorbance at 254 nm (UV254) during 10-200 mg/L PAC dosage. The removal efficiencies of organic matter by MF membrane filtration decrea...

This paper presents the design, development and realization of a fast and novel process for the synthesis of 3C silicon carbide (β-SiC) nanorods and submicron powder. Using SiO₂ (or Si) and activated carbon (AC), this process allows β-SiC to be synthesized with almost 100% purity in timeframes of seconds or minutes using multimode microwave rotary tube reactors under open-air conditions. The sy...

This study is to investigate on the long term performance of submerged membrane adsorption hybrid system (SMAHS) for organic matter removal from synthetic wastewater representative of biologically treated wastewater using low dose of powder activated carbon (PAC). A simple periodic backwash system is used to declog the hollow fiber membrane. In this reactor, bioreaction takes place due to the g...

In the present work, TiO2 nanoparticle and multi-walled carbon nanotubes composite powder is prepared hydrothermally. After doctor blading the paste from composite powder, the resulted composite film is sensitized with Cu-based metal-organic frameworks using a layer-by-layer deposition technique and the film is characterized using FE-SEM, EDX, XRD, UV/Visible spectrophotometry and photoluminesc...

Activated carbon (AC) derived from coconut shells (CS-AC) was obtained through pyrolysis at 700°C and subsequently activated with H3PO4. AC ground in a Wiley mill several times to form powder particles particle scales of 80, 100, 200 meshes. The characterization the studied using scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy (FT-IR...

Background: Nanotechnology is a new approach that has been lionized in recent years. One of its applications is its consumption as an absorbent. In this study, the single-wall carbon nanotubes (SWCNTs) were used as an absorbent for sampling benzene in the air. Materials and Methods: For this study, SWCNTs manufactured by Iran and SKC’s activated charcoal were used for sampling benzene vapors....

presence of heavy metals in the aquatic systems has become a serious problem. as a result, therehas been a great deal of attention given to new technologies for removal of heavy metal ions from contaminated waters. adsorption is one of the effective methods for removal of toxic heavy metal such as chromium (vi). in the present study, adsorbent is prepared from rice husk, a low cost by product f...

this paper presents the adsorption of phenol on granular activated carbon (gac) from nutrient medium suitable for roorganisms’ growth and also the subsequent biodegradation. two parameter langmuir and freundlich adsorption isotherm models were studied using large range of phenol concentration (50-1000 mg/l). in low range of phenol concentration (50-300 mg/l), correlation coefficient, normaliz...