BACKGROUND Poor mechanical properties are among the main limitations of acrylic resins. Addition of titanium dioxide (TiO2) nanoparticles to acrylic resin has been shown to improve its mechanical properties with an adverse effect on its color. Thus, this study sought to assess the tensile and impact strength of a color modified heat cure acrylic resin reinforced with TiO2 nanoparticles. MATER...

Background and Purpose: In people wearing dentures, the growth of various Candida species under the prosthesis leads to the formation of biofilm, which can play the role of a reservoir for Candida and other kinds of microbes. Since nano-chitosan particles can cause lasting antimicrobial activity, a more recent approach that utilizes acrylic resins with nano-chitosan particles is proposed. Th...

PURPOSE The aim of this study was to compare the color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for the non-metal clasp dentures to those of thermoplastic polyamide and conventional heat-polymerized denture base resins. MATERIALS AND METHODS Three types of denture base resin, which are conventional heat-polymerized acrylic resin (Paladent 20), thermoplastic po...

poly (lactide-co-glycolide)/bioactive glass/hydroxyapatite (pbgha) and poly (lactide-co-glycolide)/ bioactive glass (pbg) nanocomposite coatings with bone. materials and methods: sol-gel derived 58s bioactive glass nanoparticles, 50/50 wt% poly (lactic acid)/poly (glycolic acid) and hydroxyapatite nanoparticles were used to prepare the coatings. the nanocomposite coatings were characterized by ...

o bjectives: heat-polymerized acrylic resin has been the most commonly used denture base material for over 60 years. however, the mechanical strength of acrylic resin is not adequate for long-term clinical performance of dentures. consequently, fracture is a com- mon clinical occurrence, which often occurs in the midline of denture base.this study aimed to evaluate the efficacy of cold cure and...

In recent decades attention has focused on the development of non-toxic fouling-release coatings based on silicone polymers as an alternative to toxic antifouling coatings. As fouling-release coatings gain market share, they will contribute to environmental contamination by silicones. We report effects of eight model polysiloxane and three commercial foul-release coatings on embryonic developme...

The removal of biological colonization on building materials cultural heritage is a difficult challenge, as the treatment must completely eliminate patina without altering treated substrate and possibly delaying new colonization. With aim searching for systems to minimize biocide impact substrate, environment operators, different alginate–oxidizing hydrogels were previously tested optimized in ...

OBJECTIVE The purpose of this study was to compare the effects of mechanical polishing (MP) and chemical polishing (CP) on the average surface roughness (Ra) of heat-cured (HC) and light-cured (LC) denture base acrylic resins. METHODS A total of 120 specimens (30 × 15 × 3 mm) were prepared from one HC and one LC acrylic resin. To remove nodules and gross surface irregularities, all specimens ...

We evaluated the microstructure of the edges of currently available foldable intraocular lenses (IOLs). The methodology used assisted an IOL manufacturer (Hoya, Japan) to optimise the edge profile of its lenses. Ten designs of hydrophobic acrylic, six designs of silicone and 24 designs of hydrophilic acrylic IOLs were imaged under scanning electron microscopy (SEM), and the photographs were imp...