Metal contact to SiC is not easy to modulate since the contact can be influenced by the metal, the termination of the SiC, the doping, and the fabrication process. In this work, we introduce a method by inserting a thin Al2O3 layer between metal and SiC to solve this problem simply but effectively. The Al2O3/n-SiC interface composition was obtained with X-ray photoemission spectroscopy, and the...

Ovidius University of Constanta, Department of Physics, 124 Mamaia Blvd, 900527, Romania ___________________________________________________________________________________________ Abstract. A series of Fe2O3-Al2O3 mixed systems with composition ranging from 1 to 9% of Al2O3 were prepared by a traditional chemical method and examined for structural characteristics. XRD spectra and SAED patterns...

We report the structure and stability of ceria units deposited on the surface of γ-Al2O3 or incorporated in its cavities, as determined by periodic density functional calculations. Ceria species are modeled as CeO2 or Ce2O4 moieties or as a small nanoparticle, Ce13O26, on the (100) and (001) surfaces of a γ-Al2O3 slab. Among the studied structures the incorporation of Ce(4+) ions in cavities of...

Atomic layer deposition (ALD) has been widely reported as a novel method for thin film encapsulation (TFE) of organic light-emitting diodes and organic photovoltaic cells. Both organic and inorganic thin films can be deposited by ALD with a variety of precursors. In this work, the performances of Al2O3 thin films and Al2O3/alucone hybrid films have been investigated. The samples with a 50 nm Al...

the effect of γ-al2o3 nanoparticles on heat transfer rate, baffle spacing and pressure drop in the shell side of small shell and tube heat exchangers was investigated numerically under turbulent regime. γ-al2o3-water nanofluids and pure water were used in the shell side and the tube side of heat exchangers, respectively. since the properties of γ-al2o3-water nanofluids were variable, they were ...

In order to elucidate the effect of sodium on the activity of ZSM-5 supported metal oxides catalysts (ZnO-Al2O3/ZSM-5 and SnO-Al2O3/ZSM-5) for the transesterification of soybean oil with methanol, ZSM-5 supported metal oxides were prepared with and without sodium hydroxide by impregnation. The metal compositions of the ZSM-5 supported metal oxide catalysts and the metal concentrations dissolved...

We demonstrate a novel atomic layer deposition (ALD) process to make high quality nanocrystalline titanium dioxide (TiO2) and zinc oxide (ZnO) with intermediate Al2O3 layers to limit the crystal size. The waveguide losses of TiO2/Al2O3 nanolaminates measured using the prism coupling method for both 633 nm and 1551 nm wavelengths are as low as 0.2 ± 0.1 dB/mm with the smallest crystal size. We a...

The photocatalytic oxidation of phenol in water in the band reactor with supported TiO2 catalysts was investigated. Modified anatase/Al2O3 catalysts were used as the photocatalysts. The main aim of these studies was to determine catalytic activity of TiO2/Al2O3 and V-TiO2/Al2O3 in the removal of phenol from water. The effectiveness was measured in the configurations: TiO2/UV/O2/H2O2, TiO2/O2/H2...

Silicon carbide (SiC) has shown considerable potential for ultraviolet (UV) photode‐ tectors due to its properties such as wide band gap (3.26 eV for 4H-SiC), high break down electric field and high thermal stability. 4H-SiC-based UV photodetectors such as Schottky, metal-semiconductor-metal (MSM), metal-insulator-semiconductor (MIS) and avalanche have been presenting excellent performance for ...

In this paper, an experimental work was investigated on nanorefrigerant .Nano Al2O3-PAG oil was used as nano-refrigerant in R134a vapour compression refrigeration system . An experimental setup was designed and fabricated in the lab. The system performance was investigated using energy consumption test and freeze capacity test. The results indicate that Al2O3 nano refrigerant works normally and...