There is an increasing demand in the flexible electronics industry for highly robust flexible/transparent conductors that can withstand high temperatures and corrosive environments. In this work, outstanding thermal and ambient stability is demonstrated for a highly transparent Ag nanowire electrode with a low electrical resistivity, by encapsulating it with an ultra-thin Al2O3 film (around 5.3...

luminium based composite are getting a vast scope nowadays because of its properties and availability. In the present work, fly ash and AL2O3 reinforced composite are prepared using stir casting technique for varying wt.% (fly ash 3% and AL2O3 3%, 6% & 9%). Hardness and tensile properties were determined, with the addition of reinforcement the properties are improved compared to the parent meta...

nanosized al2o3 powder is synthesized by thermal metal organic chemical vapor deposition (mocvd)combined withplasma. the effects of reaction temperature, pressure, al(ch3)3 (tma) concentration and reactant gases (co2 and o2) on the characteristics of the synthesized al2o3 powders are investigated. the experimental results demonstrate that very fineal2o3 powders with mean particle size of about ...

Carbon nanotubes±Fe±Al2O3 massive composites have been prepared by hot-pressing the corresponding composite powders, in which the carbon nanotubes are arranged in bundles smaller than 100 nm in diameter and several tens of micrometers long, forming a web-like network around the Fe±Al2O3 grains. In the powders, the quantity and the quality of the carbon nanotubes both depend on the Fe content (2...

Characterization was performed on 60 nm +/3 nm films of atomic layer deposition (ALD) hafnium dioxide (HfO2) and aluminum oxide (Al2O3), and plasma-enhanced chemical vapor deposition (PECVD) silicon nitride (Si3N4) as MIM capacitor dielectric for GaAs HBT technology. The capacitance density of MIM capacitor with ALD HfO2 (2.73 fF/m 2 ) and Al2O3 (1.55 fF/m 2 ) is significantly higher than tha...

We investigate the optical and thermo-optical properties of amorphous TiO2–Al2O3 thin-film bilayers fabricated by atomic layer deposition (ALD). Seven samples of TiO2–Al2O3 bilayers are fabricated by growing Al2O3 films of different thicknesses on the surface of TiO2 films of constant thickness (100 nm). Temperature-induced changes in the optical refractive indices of these thin-film bilayers a...

The influence of catalyst support alumina-silica in terms of different Al2O3 to SiO2 mole ratios containing 20 wt.% Ni on the production of hydrogen and catalyst coke formation from the pyrolysis-catalysis of waste tyres is reported. A two-stage reactor system was used with pyrolysis of the tyres followed by catalytic reaction. There was only a small difference in the total gas yield and hydrog...

These are model studies whose aim is to obtain information that would allow development of new technology for synthesizing monolayers of Al2O3-C with adjusted microstructure on cemented carbides. The Al2O3-C layer will constitute an intermediate layer on which the outer layer of Al2O3 without carbon is synthesized. The purpose of the intermediate layer is to block the cobalt diffusion to the sy...

Pd nanoparticles (PdNPs) stabilized by methyl cellulose (MC) were synthesized in an aqueous solution, which are monodispersed nanoparticles. PdNPs/α-Al2O3 catalyst was prepared with monodispersed PdNPs and showed better catalytic performance than Pd/α-Al2O3 catalyst prepared by the incipient wetness impregnation method using Pd(NO3)2 as a precursor. The catalysts were characterized by transmiss...