Two sample sets of low density polyethylene (LDPE) were investigated and differentiated via comprehensive analysis their microstructures with specific emphasis on branching.

The heat-seal strength and failure modes of laminated films with Linear Low Density Polyethylene (LLDPE) and Low Density Polyethylene (LDPE) as the sealant materials were investigated. Heat-seal strength increases with platen temperature for all samples. The maximum achievable heat-seal strength for laminated film using LDPE and LLDPE as sealant material is 0.598 N/mm and 4.02 N/mm, respectivel...

The effects of poly(lactic acid) (PLA)-based film with inorganic antimicrobial nano-TiO₂ and nano-Ag on the physicochemical and microbial quality of Tremella aurantialba stored at 4 ± 1 °C for 16 days was investigated. Rosemary essential oil (REO, 9 wt %) was added into PLA film as plasticizer. Low-density polyethylene (LDPE) and PLA film was used as the controls. The experiment measured physic...

The degradation of different polyethylenes, LDPE, LLDPE, and HDPE, with and without antioxidants and at different oxygen concentrations in the polymer granulates have been studied in extrusion coating processing. The degradation was followed by On Line Rheometry, Size Exclusion Chromatography, Surface Oxidation Index measurements, and GC-MS Chromatography. The degradations starts in the extrude...

Cell colonization of synthetic polymers can be regulated by physical and chemical modifications of the polymer surface. High-density and low-density polyethylene (HDPE and LDPE) were therefore activated with Ar⁺ plasma and grafted with fibronectin (Fn) or bovine serum albumin (BSA). The water drop contact angle usually decreased on the plasma-treated samples, due to the formation of oxidized gr...

In this paper the pendant drop method to measure interfacial tension between molten polymers is reviewed. A typical pendant drop apparatus is presented. The algorithms used to infer interfacial tension from the geometrical profile of the pendant drop are described in details, in particular a new routine to evaluate correctly the value of the radius at the apex of the drop, necessary to the calc...

The influence of different additives: high density polyethylene (HDPE), low density polyethylene (LDPE) and TiO2 nanoparticles on the polyethylene terephthalate (PET)–rubber nanocomposite interface was investigated. The composites obtained by compression moulding from tire rubber and PET bottles’ waste were partially heterogeneous and partially compatible, as confirmed by the FTIRmeasurements. ...

The exponential increase of plastic production produces 100 million tonnes of waste plastics annually which could be converted into hydrocarbon fuels in a thermal cracking process called pyrolysis. In this research work, a direct current (DC) thermal plasma circuit is designed and used for conversion of low density polyethylene (LDPE) into diesel oil in a laboratory scale pyrolysis reactor. The...

This Critcal Review evaluates passive sampler uptake of hydrophobic organic contaminants (HOCs) in water column and interstitial water exposures as a surrogate for organism bioaccumulation. Fifty-seven studies were found where both passive sampler uptake and organism bioaccumulation were measured and 19 of these investigations provided direct comparisons relating passive sampler uptake and orga...

Diamond-like carbon (DLC) and silicon carbide (SiC) coatings are attractive because of low friction coefficient, high hardness, chemical inertness and smooth finish, which they provide to biomedical devices. Silicon wafers (Si(waf)) and silicone rubber (Si(rub)) plates were coated using plasma-enhanced chemical vapour deposition (PE-CVD) techniques. This article describes: 1- the characterizati...