Based on micro-Raman spectroscopy (m-Raman), micro X-ray fluorescence spectrometry (m-XRF), X-ray diffractometry (XRD) and optical microscopy, this paper presents the results of our analytical studies on the early Islamic pigments used in the Masjid-i Jame of Fahraj, central Iran. Our investigations showed that ultramarine blue and haematite were used as blue and red pigments, respectively. Mor...

Hydrothermal liquefaction (HTL) of microalgae Nannochloropsis (NAS) over various transition metal M/TiO2 (M = Fe, Co, Ni, Mo, and Mn) was investigated. Ni/TiO2 was the most effective catalyst to improve the yield and quality of biocrude and the liquefaction conversion. Ni/TiO2 was characterized by XRD, XRF, and XPS. The research of Effect of reaction temperature on HTL of NAS over Ni/TiO2 sugge...

Abstract—Fly ash is a waste material of coal firing thermal plants that is released from thermal power plants. It was defined as very fine particles that are drifted upward which are taken up by the flue gases. The emerging amount of fly ash in the world is approximately 600 million tons per year. In our country, it is expected that will be occurred 50 million tons of waste ash per year until 2...

This paper presents a new method for predicting the final products of red mud-slag-based alkali-activated materials (RM-AAMs) using comprehensive phase analysis. As first step, quantitative by X-ray diffraction (XRD) was used to analyze six different types mud and ground-granulated blast-furnace slag (GGBS). Secondly, fluorescence (XRF) employed determine bulk elemental oxide contents precursor...

The effect of base temperature variation on the heat transfer from unsteady state annular heat sink of cooling microelectronic device. Three types of the base temperature variation equations are taken in the present study. The Sine wave variation, Cosine wave variation & exponential variation of the base temperature. The finite element technique based on Galerkin method with axisymmetric rectan...

Synchrotron Radiation (SR) based techniques such as SR-μ Fourier Transform InfraRed (FTIR) spectroscopy, SR-μ X-Ray Fluorescence (XRF), SR-μ X-Ray Absorption Near Edge Spectroscopy (XANES) and SR-μ X-Ray Diffraction (XRD) are increasingly used for the study of cultural heritage materials, as they offer enhanced spatial resolution and chemical sensitivity. For such analyses, painting fragments a...

The core-shell method is used as a novel synthetic process of micronized Ti-Zeolite Na-A which involves calcination at 700°C of coated Egyptian Kaolin with titanium tetrachloride in acidic medium as the first step. The produced Ti-coated metakaolinite is subjected to microwave irradiation at low temperature of 80°C for 2 h. The prepared micronized Ti-containing Zeolites-A (Ti-Z-A) is characteri...

The present study investigates the chemical composition, solubility, and physical and mechanical properties of carbonate hydroxyapatite (CO3Ap) and silicon-substituted carbonate hydroxyapatite (Si-CO3Ap) which have been prepared by a simple precipitation method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray fluorescence (XRF) spectroscopy, and inductively couple...

-Chloritic veins in serpentinite and their weathering products were analyzed by X-ray powder diffraction (XRD) and X-ray fluorescence spectrometry (XRF). Chlorite formed during the Hercynianage orogenesis had apparently been partly transformed to high-charge vermiculite during subsequent metamorphism of the rocks. The idealized structural formulae for these minerals are (mlL9Fea+0.zFe2+o.4Mg9.2...

This study investigated the structure, mineralogical specifics and chemical composition, of a natural and modified diatomite ore, which obtained from the Aktyubinsk /Kazakhstan deposits by using SEM, XRF, XRD, FTIR, TGA and SDTA. Three modified forms of diatomite’s were prepared by calcinations at 900C and/or calcinations and acidification by 0.5 N HCl (D, D-HCl, D-900 and D-900-HCl). The iron(...